AMG24064A ORIENT DISPLAY CONTOUR DRAWING & BLOCK DIAGRAM 180.0± 0.5 176.0 154.8 132.2[V.V.] 127.16[A.A.] 4.1 5.5 2.0 11.6 11.0[MAX.] 16.0[MAX.] 6.9± 0.5 10.9± 0.5 14.0 CL CL 20- 1.0 P2.54X9=22.86 65.0± 0.5 56.8 54.0 39.2[V.V.] 33.88[A.A.] CL 4.25 2.54 3- 1.0 CL 2.5 4-R1.75 1.6± 0.1 1.6± 0.1 KS0086 LCD PANEL 240 x 64 DOTS 64 * 80 KS0086 * 80 KS0086 * 80 KS0086 * 0.53 0.53 * T6963C 0.49 0.49 WR RD CE C/D DB0 DB7 FS RST VDD VSS VEE FGND 5.08 SRAM 10.0 LED B/L NO B/L * OR EQUIVALENT MECHANICAL SPECIFICATION ABSOLUTE MAXIMUM RATINGS ITEM SPECIFICATION Module Size Viewing Area 180.0X65.0X11.0/14.0 UNIT mm PARAMETER Supply Voltage 132.2X39.2 mm LCD Supply Voltage Number of dots 240X64 Dot Pitch 0.53X0.53 dots mm Operating Temperature* Vin Top Dot Size 0.49X0.49 mm Storage Temperature* Tstr -10/-30 PIN CONNECTIONS PIN SYMBOL DESCRIPTION 1 FGND Frame GND 2 Vss 3 Vcc Ground Supply voltage for LCD(+) 4 5 Vee Supply voltage for LCD(-) /WR Write Data into T6963C 6 /RD 7 /CS Read Data from T6963C Chip enable for T6963C 8 C/D Register Select 9 NC NC 10 /RST Reset 11-18 DB0-DB7 SYMBOL MIN. MAX. UNIT Vdd Vlcd(Vdd-V0) -0.3 7.0 V 0 16 V -0.3 Vdd+0.3 V 0/-20 50/70 °C 60/80 °C Input Voltage ELECTRICAL CHARACTERISTICS(Ta=25° C) SYMBOL CONDITION MIN. TYP. MAX. UNIT ITEM Supply Voltage(logic) Vdd 4.5 5.0 5.5 V Supply Current(logic) Idd Vdd=5.0 9.9 9.0 12.0 mA Driving Voltage(LCD) Vlcd 12.0 12.5 13.2 V Driving Current(LCD) Ilcd 1.6 1.9 mA BACKLIGHT CHARACTERISTICS (Ta=25° C) PARAMETER Supply Voltage LED Forward Current LED Dissipation SYMBOL CONDITION MIN. TYP. MAX. UNIT If 3.8 - 630 4.3 - mA Pd - 2646 - mW Vf If=630mA 4.2 V Data Bus 19 FS Pins for selection of font 20 NC NC *T1/T2: T1for standard temperature LCM, T2 for wide temperature LCM