AN/521P H ØD ØT • Rod Wiper, Snap Fit Construction • Orange Polyurethane 361 with knifed wiping lip Housing • Open rectangular groove in one piece gland Duty • Medium Features • Heel pressure release ribs • External lip for improved dirt exclusion • Crush lip for positive location Comments • An evolution of the classic AN/B rod wiper, with improved performance • Interchangeable with corresponding AN6231 & MS28776 wipers TRANSEALS TRANSEALS TRANSEALS TRANSEALS TRAN- TRANSEALS TRANSEALS TRANSEALS TRANSEALS TRANSEALS TRANSEALS TRAN- Category t Ød Metric Specifications Operating Conditions Surface Finish Maximum Speed: 4.0 m/sec Temperature Range: -40°C ~ 110°C Dynamic Sealing Face: 0.1 ~ 0.4 µmRa Static Sealing Face: 1.6 µmRa max Other Faces: 3.2 µmRa max Imperial Specifications Operating Conditions Surface Finish Maximum Speed: 12.0 ft/sec Temperature Range: -40°F ~ 230°F Dynamic Sealing Face: 4 ~ 16 µinCLA Static Sealing Face: 63 µinCLA max Other Faces: 125 µinCLA max Manufacturer • Hallite Size Range • US Imperial Imperial Sizes Ød ØD +0.004 -0 H +0.003 -0 ØT +0.005 -0 t AN0625-521P 0.625 0.885 0.107 0.772 0.187 AN0750-521P 0.750 1.010 0.107 0.897 0.187 AN0875-521P 0.875 1.147 0.107 1.023 0.187 AN1000-521P 1.000 1.272 0.107 1.148 0.187 AN1125-521P 1.125 1.397 0.107 1.273 0.187 AN1250-521P 1.250 1.522 0.107 1.398 0.187 Part No. AN1375-521P Ød 1.375 ØD 1.677 H 0.107 ØT 1.542 t 0.187 AN1500-521P 1.500 1.802 0.107 1.668 0.187 AN1750-521P 1.750 2.052 0.107 1.918 0.187 AN2000-521P 2.000 2.302 0.107 2.178 0.187 AN2500-521P 2.500 2.802 0.107 2.678 0.187 AN3000-521P 3.000 3.364 0.122 3.209 0.211 AN3500-521P 3.500 3.864 0.122 3.709 0.211 AN4000-521P 4.000 4.427 0.138 4.240 0.238 11 July 2003 Part No. Tolerances Imperial Sizes (cont’d) Phone: +61 ( 8) 9451 6011 Facsimile: + 61 ( 8) 9458 5766 Email: [email protected] Web: http: //www.transeals.com.au 21