BATRON Specification for BT 96040AV-FSTF-12-I2C-COG Version March 2004 0 Fax 089/ 56017-119 DATA MODUL AG Landsberger Str. 322 80687 München Tel.: 089/ 56017-0 www.data-modul.de BATRON VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004 PAGE 2 OF 10 DOCUMENT REVISION HISTORY 1: DOCUMENT DATE DESCRIPTION CHANGED REVISION BY FROM TO CHEN HUI A 2004.03.23 First Release. JUAN Based on a.) Test Specification: VL-TS-COG-BT96040-03 REV. A, 2003-10-31. b.) VL-QUA-012A-S, REV. P, APR/2003 (English version). CHECKED BY SUNNY LEE According to VL-QUA-012A-S, LCD size is small because Unit Per Laminate=35 which is more than 6pcs/Laminate. Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 – www.data-modul.de BATRON VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004 PAGE 3 OF 10 CONTENTS Page No. 1. GENERAL DESCRIPTION 4 2. MECHANICAL SPECIFICATIONS 4 3. INTERFACE SIGNALS 6 4. 4.1 4.2 ABSOLUTE MAXIMUM RATINGS ELECTRICAL MAXIMUM RATINGS (Ta=25qC) ENVIRONMENTAL CONDITION 7 7 7 5. 5.1 5.2 ELECTRICAL SPECIFICATIONS TYPICAL ELECTRICAL CHARACTERISTICS TIMING SPECIFICATIONS 8 8 9 6. LCD COSMETIC CONDITIONS 10 Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 – www.data-modul.de BATRON VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004 PAGE 4 OF 10 Specification of LCD Module Type Item No.: COG-BT96040-03 1. General Description 96 x 40 dots FSTN Black & White Positive Transflective Dot Matrix LCD module. Viewing Angle: 12 O’clock direction. Driving duty: 1/40 Duty, 1/7.3 bias. Driving IC: ‘PHILIPS’ PCF 8558U/2/F2 (Gold Bump) LCD controller/driver or equivalent. COG. Data interface: I2C-bus. Bonded pins. 2. Mechanical Specifications The mechanical detail is shown in Fig. 1 and summarized in Table 1 below. Table 1 Parameter Outline dimensions Viewing area Active area Display format Weight: Specifications 46.0(W) x 36.2(H) x 1.845(D) (Excluded pins) 40.0(W)x 23.0(H) 35.2(W)x 18.2(H) 96 x 40 TBD Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 – Unit mm mm mm dots grams www.data-modul.de BATRON VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004 PAGE 5 OF 10 Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 – www.data-modul.de BATRON VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004 PAGE 6 OF 10 ˖ˢ˚ˀ˕˧ˌˉ˃ˇ˃ˀ˃ˆ ˦˗˔ ʺˣ˛˜˟˜ˣ˦ʺ ˣ˖˙ˋˈˈˋ˨˂˅˂˙˅ ʻ˚ˢ˟˗ʳ˕˨ˠˣʼ ˟˖˗ʳ˖ˢˡ˧˥ˢ˟˟˘˥˂ ˗˥˜˩˘˥ʳˢ˥ ˘ˤ˨˜˩˔˟˘ˡ˧ ˩˦˦ ˌˉʳ˫ʳˇ˃ʳ˗ˢ˧˦ ˌˉ ˩˟˖˗ ˩˗˗ ˦˖˟ ˇ˃ Figure 2: Block Diagram 3. Interface signals Table 2 Pin No. 1 2 3 4 5 Symbol SDA VSS VLCD VDD SCL Description I2C-bus serial data input/output Ground (0V). Power supply for LCD driver. Power supply for logic (+5V). I2C-bus serial clock input Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 – www.data-modul.de BATRON VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004 PAGE 7 OF 10 4. Absolute Maximum Ratings 4.1 Electrical Maximum Ratings(Ta = 25 ºC) Table 3 Parameter Power Supply voltage (Logic) Input voltage range (SDA,SCL) Supply voltage (LCD) Symbol VDD - VSS Vin Min. -0.5 VSS-0.5 Max. +8.0 +8.0 Unit V V Vop=VDD-VLCD 0 +11.0 V Note: The modules may be destroyed if they are used beyond the absolute maximum ratings. All voltage values are referenced to VSS = 0V. 4.2 Environmental Condition Table 4 Item Ambient Temperature Humidity Vibration (IEC 68-2-6) cells must be mounted on a suitable connector Shock (IEC 68-2-27) Half-sine pulse shape Operating Storage Temperature Temperature (Topr) (Tstg) Min. Max. Min. Max. 0qC +50qC -10qC +60qC 95% max. RH for Ta d 40qC < 95% RH for Ta > 40qC Frequency: 10 a 55 Hz Amplitude: 0.75 mm Duration: 20 cycles in each direction. Pulse duration : 11 ms Peak acceleration: 981 m/s2 = 100g Number of shocks : 3 shocks in 3 mutually perpendicular axes. Remark Dry no condensation 3 directions 3 directions Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 – www.data-modul.de BATRON VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004 PAGE 8 OF 10 5. 5.1 Electrical Specifications Typical Electrical Characteristics At Ta = 25 qC, VDD = 5Vr5%, VSS=0V. Table 5 Parameter Supply voltage (Logic) Operating voltage for LCD Symbol VDD-VSS Conditions Vop = VDD -VLCD Ta= 0qC,VDD =+5V, Character mode, Note 1 Ta=+25 qC,VDD =+5V, Character mode, Note 1 Ta=+50 qC,VDD =+5V, Character mode, Note 1 Character mode, VDD =5.0V Checker board, VDD =5.0V Min. 4.95 Typ. 5.0 Max. 5.0 5 Unit V - 7.3 - V 6.9 7.1 7.3 V - 6.9 - V - 100 150 µA - 110 160 µA Operating supply current (Logic&LCD) IDD Input signal voltage low (SDA, SCL) Input signal voltage high (SDA, SCL) Vil VSS - 0.3 VDD V Vih 0.7 VDD - VDD V Note 1: There is tolerance in optimum LCD driving voltage during production and it will be within the specified range. Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 – www.data-modul.de BATRON VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004 5.2 Timing Specifications PAGE 9 OF 10 Ta = 0 qC to +50 qC, VDD = +5.0Vr5%, VSS=0V; VLCD= VDD-3.5V to VDD-9V, VSS=0V. Refer to Figure 3, I2C Bus Timing Diagram of ’PHILIPS’ PCF8558. Table 6 Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 – www.data-modul.de BATRON VL-FS-COG-BT96040-03 REV. A (BT 96040AV-FSTF-12-I2C-COG) MAR/2004 PAGE 10 OF 10 Figure 3: I2C-Bus Timing Diagram 6. LCD Cosmetic Conditions Refer to VL-QUA-012A-S - END - Data Modul AG - Landsberger Str. 322 - 80687 München - Tel. 089-56017-0 - Fax 089-56017-119 – www.data-modul.de