ETC DJ5G

Proximity Sensors Inductive
Nickel-plated Brass Housing
Types DJ, M 14, PG 21, Namur
• Nickel-plated brass housing, cylindrical
• Diameter: M 14, PG 21
• Sensing distance: 2 to 6 mm
• Power supply: 8.2 VDC (Namur)
• Output: Namur (DIN 19 234)
• 2 m cable
Product Description
Ordering Key
Proximity switch in M 14 and
PG 21 nickel-plated brass
housings, for flush mounting
and non-flush mounting. Amplifier relay SD ... available.
Delivered with 2 m cable.
Type: Inductive proximity
switch
Rated operating dist. (mm)
Housing material
Housing
diameter
Rated
operating
dist. (Sn)
Ordering no.
Namur
M 14
M 14
PG 21
2 mm 1)
5 mm 2)
6 mm 1)
DJ 2 G
DJ 5 G
DJ 6 G
DJ 2 G
Type Selection
1)
2)
For flush mounting in metal
For non-flush mounting in metal
Specifications
Rated operational volt. (Ue)
(UB)
Self-inductance
Self-capacitance
No-load supply current (Io)
Protection
Transient voltage
Frequency of operating
cycles (f)
Assured operating dist. (Sa)
Repeat accuracy (R)
Hysteresis (H)
(Differential travel)
8.2 VDC
7 to 9 VDC
(6 to 35 VDC, all specifications not observed in
extended supply range)
≤ 300 mH
≤ 120 nF
Activated: ≤1 mA
Not activated:
DJ 2 G ≥ 3 mA
DJ 5 G ≥ 2.2 mA
DJ 6 G ≥ 2.2 mA
Max.:
9.35 mA
None
(DJ10 G: reverse polarity)
≤ 1 kV/0.5 J (prepared)
DJ 2 G
DJ 5 G
DJ 6 G
DJ 2 G
DJ 5 G
DJ 6 G
≤ 10%
2000 Hz
1000 Hz
1000 Hz
0 to 1.44 mm
0 to 4.05 mm
0 to 4.32 mm
Usable operating dist. (Su)
Ambient temperature
Operating
Storage
Degree of protection
Housing material
Body
Front
Back
Cable
DJ 2 G 0.8 x Sr ≤ Su ≤ 1.2 x Sr
DJ 5 G 0.9 x Sr ≤ Su ≤ 1.1 x Sr
DJ 6 G 0.8 x Sr ≤ Su ≤ 1.2 x Sr
DJ 2 G
-20° to +60°C (-4° to +140°F)
DJ 5 G
-25° to +70°C (-13° to +158°F)
DJ 6 G
-20° to +60°C (-4° to +140°F)
DJ 2 G
-25° to +70°C (-13° to +158°F)
DJ 5 G
-30° to +80°C (-22° to +176°F)
DJ 6 G
-25° to +70°C (-13° to+158°F)
IP 67
(Nema 1, 3, 4, 6, 13)
Nickel-plated brass
Blue ABS
Blue ABS
DJ 2 G 2 m, 2 x 0.25 mm2
DJ 5 G 2 m, 2 x 0.25 mm2
DJ 6 G 2 m, 2 x 0.50 mm2
grey PVC, oil proof
Dependent on amplifier relay
Specifications are subject to change without notice (25.06.99)
1
DJ, M 14, PG 21, Namur
Specifications (cont.)
Weight
DJ 2 G
80 g
DJ 5 G
80 g
DJ 6 G 210 g
(cable included)
Tightening torque
CE-marking
DJ 2 G
DJ 5 G
DJ 6 G
Yes
17.5 Nm
17.5 Nm
175.0 Nm
Dimensions
DJ 2 G
DJ 5 G
DJ 6 G
Wiring Diagrams
Installation Hints
Amplifier Relays, Namur
Refer to "Wiring Diagrams",
Technical information.
Refer to "Installation Hints",
Technical information.
> SD 110/210.
> SD 170/270.
2
Refer to Technical Information.
Specifications are subject to change without notice (25.06.99)