THROUGH BEAM SENSOR DL40 • DLM50 • DLV60 ➲ long range ➲ high excess gain ➲ different ways of installation ➲ highly flexible connecting cable ➲ robust design DL40 • DLM50 • DLV60 MINI THROUGH BEAM SENSOR with separate amplifier • Ø 4 mm x 11 mm • Stainless steel • f. gluing a. clamping fixture DL40 • M5 x 0,5 mm x 11 mm • Nickel-plated brass • f. screw-in fixture DLM50 • 6 mm x 6 mm x 12 mm • Nickel-plated brass • f. screw-in fixture DLV60 Actual size Actual size Actual size GENERAL TECHNICAL DATA light type Red 660nm or Infrared 880nm connection type PUR-cable with connector temperature range -10°C to +55°C protection class IP 65 SMALLEST OBJECT and SENSING DISTANCE sensing distance 1000 mm smallest object (Ø copper wire)* 0,3 mm *copper wire of infinite length 03/02 Tope Co., Ltd. Tel: (02) 8228-0658 Fax: (02) 8228-0659 e-mail: [email protected] http://www.sensor.com.tw Measurements in mm. Subject to technical change. DIMENSIONS 5.0 M2 1.5 8.0 10.0 12.0 ø4.0 DL40 2.0 SW 8 10.0 6.0 M5x0.5 6.0 DLM50 DLV60 PART DESIGNATION DL40 _ _ : light type cable length (specifications in [m] ) R: Red light standard length 1m (blank): Infrared light special cable length jacket material connector 0: M8 - connector 3 pin, female P: PUR-cable black Ø1,8mm F: highly flexible PUR-cable red Ø1,1mm 1: 719 - Binder connector (see page Options and Accessories) ORDER EXAMPLE: DL40R-P-0:1m = DL40 Red light - PUR-cable black - M8, 3 pin female: (cable length1m x 2) Please remember, for correct operation, a separate amplifier is required. 03/02