MODEL FFP12A Conductive Plastic (Servomount) Model FFP12A Extra tapping position 1 12.7 +0.13 -0.25 0 3-0.02 5 2 0.7 ●Terminal Connection Diagram 11.5±1 13±0.5 1 3 4 12.5±1 0 11.11-0.05 10±1 5 9.5MAX ●Standard Dimensions 1.57 3 1.57±0.2 1.57±0.2 2 CW ●General Specifications Standard Resistance Values: Total Resistance Tolerance: Function Characteristics: Conformity Tolerance: (Peak-Peak) Resolution: Output Smoothness: Power Rating: 300° ±5° (360° in case of Sine 360°) 360° (Endless) Mechanical Travel: Insulation Resistance: Over 1,000MΩ at 500V.D.C. 1 minute at 500V.A.C. Dielectric Strength: Below 1mN • m (10gf • cm) Starting Torque: Resistance Temperature ±400p.p.m./ Coefficient: Approx. 5g Mass: Electrical Travel: 1k, 2k, 5k, 10k (Ω) Standard Class ±15% (L) Precision Class ±10% (K) Sine 360° , 20dB log, X2 (0 X 1) 1/X (1 X 10) Standard Class ±10% Precision Class ±5% Essentially infinite Below 0.1% against input voltage 0.2W ●Special Specifications Available Extra taps (Available up to 1 tap), Shaft with front and rear extension (Rear shaft with 1mm dia. and 10mm length), With stopper (Rotating angle becomes 310° and stopper strength is 0.3N • m [3kgf • cm]), Special electrical travel, Shaft dia. (∅3.175mm) with inch dimensions, Special machining on the shaft, Special functions, Bushingmount type (Same dimensions as FCP12AC). 84