645 ÷ 660 nm LFO-65-d CW output power >1.0 mW Description: LFO-65-d - is a series of optical module on the base of uncooled Fabry-Perot laser diode coupled with singlemode SMF-28 optical fiber. Hermetically sealed modules are performed in standard coaxial package with built-in driver and gradient collimating microlens. The low operating voltage and current levels enable to use portable power supply. The modules operate in wide temperature range, have stable output power and lifetime more than 5*103 hours. LFO-65-d – are the best light sources for visual damage detecting in lines on singlemode or multimode optical fiber. Optical and electrical characteristics (Т=25оС): Characteristics Symbol Test condition Min Typ. Max Units Output power from fiber end POP IOP 0.8 1.0 Wavelength λOP POP 645 650 660 nm Spectral width (FWHM) ∆λ POP 1.0 2.0 nm Optical parameters mW Optical fiber Fiber core/cladding diameter DC/DCL 9/125 Optical connector type µm «FC» Electrical parameters Operating mode CW Operating voltage UP Operating current IP 2.6 Reverse polarity protection 3.0 3.5 V 50 mA yes Climatic parameters Operating temperature range TOP -10 +40 °C Storage temperature range TST -20 +70 °C Package specifications: Pin Function black “-“ VDC red “+” VDC, LD anode, case ROITHNER LASERTECHNIK A-1040 VIENNA, SCHOENBRUNNER STRASSE 7, AUSTRIA TEL: +43 -1- 586 52 43-0 FAX: +43 -1- 586 52 43-44 e-mail: [email protected] http://www.roithner-laser.com