N Series UL Recognized CSA Certified Low profile version of our Signal Sentry series. Available with sleeve or block inductors and optional grounded shielding. Grounded shielding allows connection to grounded cables for additional RFI protection. Typical Impedance in Ohms Specifications PCB Terminals Solderability Ferrites Type: Sleeves: Block: Phosphor bronze 50 microinches gold 100 microinches nickel 20 milliohms maximum 30 milliohms maximum 60/40 Impedance in Ohms Contacts Material: Plating: Barrier underplating: Resistance: Initial: After durability testing (500 mating cycles): High resistivity, nickel zinc ceramic Single-aperature cylinders Multi-aperature rectangular prism Frequency MHz Shield Material Solder-plated phosphor bronze Housing Material Black glass-filled polyester N 128 Ferrite block (Valox 457) Ferrite sleeve Pricing Dielectric Withstanding Voltage Line-to-line and line-to-ground 1000VAC for 60 seconds Consult your local Corcom sales representative for pricing. Part No. Part No. Printed Circuit Board Retention Before soldering: After soldering: RJ11-6N-B RJ11-6N-S RJ11-6N3-B RJ11-6N3-S RJ11-6N4-B RJ11-6N4-S RJ45-8N-B RJ45-8N-S RJ45-8N3-B RJ45-8N3-S RJ45-8N4-B RJ45-8N4-S 1 lb. minimum 20 lb. minimum Model dimensions and PC board layout on pages 131 to 133. Libertyville, IL (847) 680-7400