ECS-2200 SERIES 8 PIN DIP CLOCK OSCILLATOR The ECS-2200 Series clock oscillator can drive both HCMOS and TTL logic. This oscillator also features tri-state enable/disable capabilities in an 8 pin DIP package. FEATURES • 50pF HCMOS/TTL logic • Tri-State enable/disable • Wide frequency range • Resistance weld package • 3.3V operation (optional) PART NUMBERING GUIDE PART NUMBER * ECS-2200A ECS-2200B ECS-2200C FREQUENCY STABILITY ±100 PPM ±50 PPM ±25 PPM * Complete part number to include frequency. i.e. ECS-2200A-100 (100 = 10.000MHz) OPERATING CONDITIONS/ELECTRICAL CHARACTERISTICS PARAMETERS FREQUENCY RANGE (f o) OPERATING TEMP. RANGE (TOPR) STORAGE TEMP. RANGE (TSTG) FREQUENCY STABILITY FREQUENCY RANGE 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 25.000 25.000 ~ 50.000 50.000 ~ 80.000 80.000 ~ 150.000 1.000 ~ 80.000 80.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 150.000 1.000 ~ 80.000 80.000 ~ 150.000 1.000 ~ 150.000 INPUT CURRENT (IDD) OUTPUT SYMMETRY RISE TIME (T R) FALL TIME (T F) (V OL) (V OH) (I OL) (I OH) OUTPUT VOLTAGE OUTPUT CURRENT OUTPUT LOAD START-UP TIME (T S) SUPPLY VOLTAGE (V DC) CONDITIONS MINIMUM 1.000 0 -55 -100 All conditions* 50% V DD level 50% V DD level 10% ~ 90% V DD level 90% ~ 10% V DD level I OL = 16 mA I OH = -16 mA V OL = 0.5 V V OH = 4.5 V TTL HCMOS HCMOS 0.0V TO 5.0V +5.0 ±0.25 TYPICAL 17 33 45 67 50 ±3 50 ±3 45 40 MAXIMUM 150.000 +70 +125 +100 25 46 77 82 55 60 5 5 0.5 4.5 16 -16 10 50 30 10 UNITS MHz ˚C ˚C PPM mA mA mA mA % % nS nS V V mA mA TTL pF pF mS V DC * Inclusive of 25˚C tolerance, operating temperature range, input voltage change, load change, aging, shock and vibration. ** An internal pullup resistor from pin 1 to pin 14 allows active output if pin 1 is left open. PACKAGE DIMENSIONS (mm) TR 2.4VDC 1.4VDC 4 7.62 1 5 8 Figure 1) ECS-2200 Series – Side, Bottom and Top views 5 0.01µF 0 VDC 40% min 60% max 7.62 4 8 +5.0V 0.4VDC (0.5VDC) 0 LEVEL 13.2 max 0.5 13.2 max 0.8 4 min. 5.4 max. TF 1 LEVEL Open 1 +5.0V TF TR 90% VDD DC Open 1 8 50% VDD DC 40% min 60% max Figure 4) HCMOS Output Wave Form 4 5 TP CL 0 VDC L GND/CASE CND High Impedance +5VDC IN916 x 4 CL= 15pf 0.01µF 10% VDD DC 0 LEVEL RL Figure 3) TTL Test Circuit Figure 2) TTL Output Wave Form 1 LEVEL TP PIN CONNECTIONS #1 H or Open #4 Ground #5 Output #8 GND +5.0V Figure 5) HCMOS Measurement Circuit (CL = 15pF) ENABLE / DISABLE FUNCTION** OUTPUT (PIN 8) INH (PIN 1) OPEN*** ACTIVE 1 LEVEL V IH ≥ 2.2 V (V IH ≥ 2.0 V ACTIVE ABOVE 70MHz) ‘0’ LEVEL V IL ≤ 0.8 V HIGH Z ESC-2200 STAND-BY-FUNCTION #1 (Control Term.) Open or “H” “L” #5 (Output Term.) Oscillation “H” Level ECS, INC. INTERNATIONAL 1105 S. RIDGEVIEW, OLATHE, KS 66062 • 913-782-7787 • 800-237-1041 • FAX 913-782-6991 • WWW.ECSXTAL.COM OSCILLATORS 34 OSCILLATORS