Proximity Sensors Inductive
Thermoplastic Polyester Housing
Type EIA 4025, 40 x 40 x 120 mm
• Rotable-head, 5 positions
• Mounting dimensions in accordance with
DIN 43694
• Glass-reinforced thermoplastic polyester housing
• Sensing distance: 25 mm
• LED-indication for power and output ON
• Fully protected
• DC types 4-wire NO & NC, 10-55 VDC
• AC/DC types 2-wire NO & NC, 20-250 VAC/DC
Product Description
Ordering Key
Inductive proximity switch in
standard limit switch housing.
Rugged glass-reinforced polyester housing. Sensing face
adjustable in up to 5 positions. 2-wire AC/DC for maximum efficiency.
Type
Housing type
Rated operating dist.(mm)
Output type
Housing material
Rated
operating
dist. (Sn)
Ordering no.
Transistor NPN
Make & break switching
Ordering no.
Transistor PNP
Make & break switching
Ordering no.
Power MOSFET
Make & break switching
25 mm 1)
EIA 4025 NPAP
EIA 4025 PPAP
EIA 4025 UPAP
EIA 4025 PPA P
Type Selection
1)
2)
2)
For non-flush mounting
Delivered: NO (make switching)
Specifications
Transistor NPN/PNP
Power MOSFET output AC types
Rated operational voltage (Ue)
(UB)
Ripple
Rated operational current (Ie)
Continuous
11.3 to 50 VDC
10 to 55 VDC (rippled included)
≤ 15%
24 to 230 VAC/VDC (VAC: 45 to 65 Hz)
20 to 250 VAC/VDC (VAC: 45 to 65 Hz)
-
≤ 200 mA
Short-time
No-load supply current (Io)
Minimum load current
OFF-state current (Ir) (leakage)
≤ 25 mA
50 µA
Voltage drop (Ud)
0.8 to 3.5 V
Protection
Power ON delay
Frequency of operating cycles (f)
Indication for supply ON (LED 2)
Indication for output ON (LED 1)
Rated operating dist. (Sn)
Repeat accuracy (R)
Reverse polarity, short-circuit
≤ 100 ms
≤ 100 Hz
LED, green
LED, yellow
25 mm
≤ 5%
5 - 250 mA @ 25°C
5 - 180 mA @ 70°C
≤ 2 A, t ≤ 20 ms (Max. 1 pulse per s)
5 mA
≤ 1.7 mA @ 120 VAC
≤ 2.5 mA @ 220 VAC
Static: ≤ 10.5 V
Dynamic: ≤ 7.5 V
Transient voltages, short-circuit
≥ 200 ms
≤ 100 Hz
LED, yellow
25 mm
≤ 5%
Specifications are subject to change without notice (20.08.01)
1
EIA 4025, 40 x 40 x 120 mm
Specifications (cont.)
Hysteresis (H)
(Differential travel)
Effective operating dist. (Sr)
Usable operating dist. (Su)
Ambient temperature
Operating
Storage
Degree of protection
Shock resistance
Vibration resistance
Housing material
Terminal block
Cable gland
Weight
CE-marking
Transistor NPN/PNP
Power MOSFET output AC types
3 to 20% of sensing distance
0.9 x Sn ≤ Sr ≤ 1.1 x Sn
0.9 x Sr ≤ Su ≤ 1.1 x Sr
3 to 20% of sensing distance
0.9 x Sn ≤ Sr ≤ 1.1 x Sn
0.9 x Sr ≤ Su ≤ 1.1 x Sr
-25° to +70°C (-13° to +158°F)
-30° to +80°C (-22° to +176°F)
IP 67
(Nema 1, 3, 4, 6, 13)
30 G/ 11 ms
10 to 50 Hz/1 mm/5 min.
PBTP
4 terminals for 2 x 2.5 mm2 wires,
self-lifting
M20 x 1.5
200 g
Yes
-25° to +70°C (-13° to +158°F)
-30° to +80°C (-22° to +176°F)
IP 67
(Nema 1, 3, 4, 6, 13)
30 G/ 11 ms
10 to 50 Hz/1 mm/5 min.
PBTP
2 terminals for 2 x 2.5 mm2 wires,
self-lifting
M20 x 1.5
200 g
Yes
Wiring Diagrams
Dimensions
40
5.3
1
4
7.3
30
2
40
Sensing
surface
3
EIA 4025 NPAP
7.3
46
LED1 LED2
60
6.5
120
1
4
2
3
EIA 4025 PPAP
Internal programmable
EIA 4025 UPAP
2
Specifications are subject to change without notice (20.08.01)
EIA 4025, 40 x 40 x 120 mm
Installation Hints
Table 1
Installation examples
Sensing surface on head
("top"); other orientations of
the sensing surface mean
deviations from nominal
sensing distance.
Figure 1
a (mm) ≥ 40
Sn (mm) ≤ 20
Figure 2
a (mm) ≥ 40
Sn (mm) ≤ 25
Figure 3
Flush mounting not
permitted
a
a
a
Table 2
Adjacent mounting
To avoid cross-interference
when mounting the sensors
next to each other, the given
separations (a) should be
maintained.
Figure 4
a (mm) ≥ 120
a
a
Specifications are subject to change without notice (20.08.01)
3