Agilent HDSP-431G, HDSP-433G, QDSP-499G 10 mm Three Digit Slim Font with 2-Colons Seven Segment Displays Data Sheet Features • Excellent appearance • Slim font design Description The 10 mm (0.4 inch) Three Digit Slim Font with 2-Colons Seven Segment Displays incorporates a new slim font character design. This slim font features narrow width, specially mitered segments to give a fuller appearance to the illuminated character. Faces of these displays are painted a neutral gray for enhanced on/off contrast. • Mitered corners, evenly illuminated segments All devices are available in either common anode or common cathode configuration with tinted green segments. • Gray face for optimum on/off contrast • Choice of colors: green • Choice of character size: 10 mm (0.4 inch) • Characterized for luminous intensity Devices Green HDSP-431G HDSP-433G QDSP-499G Description 3 Digit, Common Anode, Untinted-Diffused, 0.4" Display 3 Digit, Common Cathode, Untinted-Diffused, 0.4" Display 3 Digit, Common Anode, Untinted-Diffused, 0.4" Display, without Pin 6 and No DP. Part Numbering System 5082 - x xx x - x x x xx HDSP - x xx x - x x x xx Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color[1] G: Green Device Specific Configuration[1] Refer to Respective Data Sheet Package[1] Refer to Respective Data Sheet Notes: 1. For codes not listed in the figure above, please refer to the respective data sheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part-number. Color and Intensity Binbs are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective data sheet for specific bin limit information. 2 Package Dimensions (HDSP-431G/HDSP-433G/QDSP-499G) FRONT VIEW 10.00° RIGHT SIDE 6.00 (0.236) 3.90 ± 0.50 (0.154) PIN 15 10.00 (0.394) F GB 10.16 (0.400) 12.80 (0.504) PIN 1 DIGIT 1 A E C DIGIT 2 L L2 D DP1 6 – ∅1.20 (0.047) DIGIT 3 L3 DP2 DP3 10.16 (0.400) x 2 (0.800) BOTTOM SIDE 30.02 (1.182) TOP SIDE 6.00 (0.236) HDSP-XXXX YWW XZ COO DATE CODE LUMINOUS INTENSITY CATEGORY 7.00 (0.276) COUNTRY OF ORIGIN 2.54 x 7 (0.700) COLOR BIN PIN 6 PIN 11 – ∅0.45 (0.018) NOTE: QDSP-499G DOES NOT HAVE PIN 6 AND THEREFORE DP1, DP2, AND DP3 ARE NOT DISPLAYED. NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. UNLESS OTHERWISE STATED, TOLERANCES ARE ± 0.25 mm. PIN 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 3 FUNCTION DIGIT 1 COMMON A/C E C D DIGIT 2 COMMON A/C DP DIGIT 3 COMMON A/C G NO PIN NO PIN B A NO PIN L1, L2, & L3 COMMON A/C F Internal Circuit Diagram (Common Cathode) 1 COM 5 COM 14 DIGIT 1 DIGIT 2 L1 A 12 B 11 C 3 D 4 E 2 F 15 7 COM G 8 DP 6 L2 DIGIT 3 L3 NOTE: QDSP-499G DOES NOT HAVE PIN 6 CONNECTED. Internal Circuit Diagram (Common Anode) 1 COM 5 COM 14 DIGIT 1 DIGIT 2 L1 A 12 B 11 C 3 D 4 E 2 F 15 7 COM G 8 DP 6 L2 DIGIT 3 L3 NOTE: QDSP-499G DOES NOT HAVE PIN 6 CONNECTED. Absolute Maximum Ratings at TA = 25˚C Description Average Power per Segment or DP Peak Forward Current per Segment or DP DC Forward Current per Segment or DP Operating Temperature Range Storage Temperature Range Reverse Voltage per Segment or DP Wave Soldering Temperature for 3 Seconds 1.59 mm below Body Green 65 100 25 –40 to +105 –40 to +105 3 250 Units mW mA mA ˚C ˚C V ˚C Note: 1. Derate above 40˚C at 0.33 mA/˚C for Green. Electrical/Optical Characteristics at TA = 25˚C Device Series HDSP-431G/ HDSP-433G/ QDSP-499G Parameter Luminous Intensity/ Segment (Digit Average) Forward Voltage/ Segment or DP Peak Wavelength Dominant Wavelength Reverse Current Symbol IV Min. 3.200 Typ. 5.000 Max. Units mcd Test Conditions IF = 10 mA VF 2.25 2.50 V IF = 20 mA λPEAK λd IR 568 573 100 nm nm µA IF = 20 mA IF = 20 mA VR = 5 V Notes: 1. Typical specification for reference only. Do not exceed absolute maximum ratings. 2. The dominant wavelength, λ, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 4 Intensity Bin Limits (mcd) Green Color Categories RθJ-A = 770°C/W 30 25 20 GREEN 15 10 5 0 20 30 40 50 60 70 80 90 100 110 120 TA – AMBIENT TEMPERATURE – °C Figure 1. Maximum allowable DC current vs. ambient temperature. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027. 5 Color Green Bin 3 4 Note: 1. All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information. 100 90 80 70 60 50 40 30 GREEN 20 10 0 0 Dominant Wavelength (nm) Min. Max. 570.00 574.50 567.00 571.00 1 2 3 4 VF – FORWARD VOLTAGE – V Figure 2. Forward current vs. forward voltage. 5 RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 10 mA FOR GREEN) 40 35 IF – FORWARD CURRENT PER SEGMENT – mA IDC – MAXIMUM DC CURRENT PER SEGMENT – mA HDSP-301G/303G/561G/563G IV Bin Category Min. Max. K 1.800 3.600 L 2.800 5.600 M 4.500 9.000 8 6 4 2 GREEN 0 0 5 10 15 20 25 IF – DC FORWARD CURRENT – mA Figure 3. Relative luminous intensity vs. DC forward current. 30 www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright © 2004 Agilent Technologies, Inc. July 17, 2004 5988-4824EN