BHT CONNECTOR Crimp Emboss Tape Disconnectable Crimp style connectors 5.1mm (.201") pitch Features –––––––––––––––––––––––– • High withstanding voltage Conforming to IEC664-1 standards, the BHT connector is designed to have a enough electrical creep distances at the high-voltage side. Thus, compared to the conventional power supply connector for liquid crystal display backlight lamps, higher voltage is guaranteed. • Low profile Only 2.8mm (.118") height. • Housing construction Housing is of 2-piece construction, to prevent the contact for the higher voltage side from being exposed, while the lower voltage side is designed to be shorter for easy insertion of the contact even with thin wires. Low profile connectors with high withstanding voltage, designed for connecting liquid crystal display backlight lamps to their starters. Specifications ––––––––––––––––––– H T JS • Current rating: 1.0A AC, DC • Voltage rating: 1,500V AC, DC • Temperature range: -25˚C to +85˚C (including temperature rise in applying electrical current) • Contact resistance: Initial value/10m Ω max. After environmental testing/20m Ω max. • Insulation resistance: 1,000M Ω min. • Withstanding voltage: 4,000V AC/minute • Applicable wire: AWG #28 to #24 Insulation O.D/0.9 to 1.7mm(.035" to .067") * Contact JST for details. Standards –––––––––––––––––––––– 0 1 Recognized E60389 Certified LR20812 164 BHT CONNECTOR Contact ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 4.75(.187) 0.9(.035) 1.3 1.4 (.051) (.055) Model No. Applicable wire AWG # Insulation O.D. mm(in.) Q'ty / reel 28 to 24 10,000 0.08 to 0.22 1.5 (.059) SBHT-002T-P0.5 mm2 0.9 to 1.7(.035 to .067) Material and Finish Copper alloy, tin-plated 1.2 (.047) Housing ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– 8.4(.331) Model No. BHTR-02VS Circuits 2.8(.110) 2 Q'ty / box 1,000 H JST 13.2(.520) Material 5.1(.201) PBT, UL94V-0, natural (white) 2.2 (.087) Shrouded header ––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Model No. SM02B-BHTS-B-TB Circuits 2 10.0(.394) 3.35(.132) 1.75(.069) 1,250 Material and Finish 1.0(.039) 11.0(.433) Press pin: Copper alloy, copper-undercoated, tin/lead-plated Post: Copper alloy, copper-undercoated, tin/lead-plated Wafer : Modified 6T nylon, UL94V-0, natural (ivory) Solder tab: Copper alloy, copper-undercoated, tin/lead-plated 2.8 (.110) H JST Q'ty / reel Note: The products listed above are supplied on embossed tape. 3.6(.142) Taping specifications –––––––––––––––––––––––––––––––––––––––––––––––––––––– Feeding direction Feeding direction 380±2.0(14.961±.079)dia. Carrier tape Lead tape (Unloaded area) Connector 20 vacancies min. loaded area 400(15.748)min. 2.5 25.5+-1.0 2.0±0.5 (1.004 +.098 (.079±.020) -.039 ) Feeding direction 4.0±0.1 2.0±0.1 (.157±.004) (.079±.004) Cover tape Carrier tape 11.5±0.1 (.435±.004) 24.0±0.3(.945±.012) 1.55±0.05(.061±.002)dia. 1.75±0.1(.069±.004) [13(.512)dia.] Tail tape (Unloaded area) 40.0(1.575)min. Cover tape leader area 16.0±0.1(.630±.004) 0.3±0.05 (.012±.002) Note: 1. Conforms to JIS C0806. Tape width and tape connector recess dimensions depend the connector outer dimensions. 2. Specifications are subject to change without prior notice. 165 BHT CONNECTOR 10.1+0.1 (.398 ±.004 0 0 ) 0 0 8.2-0.1 (.323 -.004 ) 2.7±0.05 (.106±.002) 11.1+0.10 (.437 +.004 0 ) 1.8+0.10 (.071+.004 0 ) 0 0 9.8-0.1 (.386 -.004 ) +0.1 +.004 12.3 0 (.484 0 ) 2.8 (.110) 16.8 (.661) 0 0 7.3-0.1 (.287 -.004 ) 0.8+0.10 (.031 +.004 0 ) 9.2±0.05 (.362±.002 ) 4.5±0.05 (.177±.002) 3.0±0.05 (.118±.002 ) 0.9+0.10 (.035 +.004 0 ) 1.0+0.10 (.039 +.004 0 ) PC board layout (viewed from component side) and Assembly layout –––––––––––––––––– 0.3+0.10 (.012 +.004 0 ) Applicator for the semi-automatic press AP-K2N ––––––––––––––––––––––––––––––– Contact SBHT-002T-P0.5 166 Crimp applicator MKS-L with safety cover without safety cover APLMK SBHT002-05 APLNC SBHT002-05 Compact crimp applicator MKS-LS with safety cover without safety cover – – Strip-crimp applicator MKS-SC with safety cover –