881.5 MHz SAW Filter 25 MHz Bandwidth Part Number SF0881BA02514S Integrated Circuit Systems, Inc. DESCRIPTION Miniature 869 to 894 MHz surface acoustic wave (SAW) bandpass filter in a 3.0x3.0 mm LCC package to be used as an RF front end filter in cellular phone equipment. TYPICAL PERFORMANCE Rev X1 25-May-05 Page 1 of 3 ICS • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com/saw.aspx 881.5 MHz SAW Filter 25 MHz Bandwidth Part Number SF0881BA02514S Integrated Circuit Systems, Inc. MAXIMUM RATINGS Parameter Operating Temperature Range Storage Temperature Range Input Power Level Max. D. C. Voltage between Each Terminal Min -40 -40 Max +85 +85 +23 10 Units ºC ºC dBm V SPECIFICATION Parameter Center Frequency FC Bandwidth Insertion Loss1 Passband Amplitude Ripple1 Stopband Rejection2, DC to 800 MHz Stopband Rejection2, 824 to 869 MHz Stopband Rejection2, 978 to 106 MHz Stopband Rejection2, 1088 to 1119 MHz Stopband Rejection2, 1119 to 2600 MHz Return Loss1 Terminating Impedance Min Typ 881.5 Max 25 3.0 1.8 20 35 25 30 20 10 50 Units MHz MHz dB dB dB dB dB dB dB Ω// 0nF Notes: 1. Within passband: 869 to 894 MHz MHz 2. Rejection relative to insertion loss TEST CIRCUIT 50 ohm single-ended No matching circuit required Rev X1 25-May-05 Page 2 of 3 ICS • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com/saw.aspx 881.5 MHz SAW Filter 25 MHz Bandwidth Part Number SF0881BA02514S Integrated Circuit Systems, Inc. PACKAGE OUTLINE AND SUGGESTED PCB FOOTPRINT 3.0 X 3.0 MM, SMP SUGGESTED PCB FOOTPRINT PIN NO. 2 5 1, 3, 4, 6 DESCRIPTION INPUT OUTPUT GROUND NOTES: DIMENSIONS IN MM All specifications are believed to be accurate and reliable. However, ICS reserves the right to make changes without notice. © 2005 Integrated Circuit Systems, Inc. All rights reserved. Rev X1 25-May-05 Page 3 of 3 ICS • SAW Products • 324 Clark Street, Worcester, MA 01606, USA • Phone 508-852-5400 • Fax 508-852-8456 www.icst.com/saw.aspx