FBO16-12N VRRM = 1200 V Single Phase Rectifier Bridge ID(AV)M = 22 A IFSM = 100 A in ISOPLUS i4-PACTM Preliminary Data 1 5 Rectifier Bridge Symbol Features Conditions Maximum Ratings VRRM IFAV ID(AV)M IFSM TC = 90°C; sine 180° (per diode) TC = 90°C TVJ = 25°C; t = 10 ms; sine 50 Hz Ptot TC = 25°C Symbol Conditions 1200 V 10 22 100 A A A 30 W (per diode) Characteristic Values (TVJ = 25°C, unless otherwise specified) min. typ. max. VF IF = 15 A; TVJ = 25°C TVJ = 125°C 1.2 1.2 IR VR = VRRM; TVJ = 25°C TVJ = 125°C RthJC RthJH 1.3 V V 5 0.2 µA mA 5 4 K/W K/W (per diode) • rectifier diodes for line frequency • ISOPLUS i4-PACTM package - isolated back surface - UL registered E 72873 - low coupling capacity between pins and heatsink - enlarged creepage towards heatsink - application friendly pinout - high reliability - industry standard outline Applications F4 • single phase mains rectifiers • power factor correction in conjunction with boost chopper (FID.../FMD... type) IXYS reserves the right to change limits, test conditions and dimensions. © 2001 IXYS All rights reserved 147 Data according to IEC 60747 refer to a single diode unless otherwise stated 1-2 FBO 16-12N Component Symbol Dimensions in mm (1 mm = 0.0394") Conditions Maximum Ratings TVJ Tstg VISOL IISOL ≤ 1 mA; 50/60 Hz FC mounting force with clip Symbol Conditions Cp coupling capacity between shorted pins and mounting tab in the case dS,dA dS,dA pin - pin pin - backside metal Weight -55...+150 -55...+125 °C °C 2500 V~ 20...120 N Characteristic Values min. typ. max. 40 1.7 5.5 pF mm mm 9 g F4 © 2001 IXYS All rights reserved 2-2