3.5x2.8 mm SMD CHIP LED LAMP Part Number: AA3528APBC/A Blue ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description SINGLE COLOR. The Blue source color devices are made with InGaN SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER on SiC Light Emitting Diode. PROCESS. Static electricity and surge damage the LEDS. AVAILABLE ON TAPE AND REEL. It is recommended to use a wrist band or anti-electrostatic IDEAL FOR BACKLIGHTING. glove when handling the LEDs. PACKAGE : 1500PCS / REEL. All devices, equipment and machinery must be electrically MOISTURE SENSITIVITY LEVEL : LEVEL 4. grounded. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4237 REV NO: V.1 DATE: MAY/11/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1201002903 Selection Guide Part No. Dice AA3528APBC/A Lens Type Blue (InGaN) WATER CLEAR Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2;1/2 18 60 120° Notes: 1. >1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. Epeak Peak Wavelength Blue ED [1] Dominant Wavelength KE1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH4237 REV NO: V.1 DATE: MAY/11/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1201002903 Blue AA3528APBC/A SPEC NO: DSAH4237 REV NO: V.1 DATE: MAY/11/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1201002903 AA3528APBC/A Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH4237 REV NO: V.1 DATE: MAY/11/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1201002903 PACKING & LABEL SPECIFICATIONS AA3528APBC/A SPEC NO: DSAH4237 REV NO: V.1 DATE: MAY/11/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1201002903