5.0X6.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: AA5060SEC/J HYPER ORANGE Features Description z SINGLE The Super Bright device is based on light emitting diode chip COLOR. z SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER made from AlInGaP. PROCESS. z AVAILABLE z IDEAL z PACKAGE : 500PCS / REEL. z MOISTURE z RoHS ON TAPE AND REEL. FOR BACKLIGHTING. SENSITIVITY LEVEL : LEVEL 4. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAG5694 REV NO: V.2 DATE: JUN/20/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201003066 Selection Guide Dice Part No. AA5060SEC/J Iv (mcd) [2] @ 20mA Lens Type HYPER ORANGE (AlInGaP) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 3300 4500 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Orange λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 640 nm IF=20mA Hyper Orange 630 nm IF=20mA Spectral Line Half-width Hyper Orange 25 nm IF=20mA C Capacitance Hyper Orange 27 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Orange 2.2 2.8 V IF=20mA IR Reverse Current Hyper Orange 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2.Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Orange Units Power dissipation 140 mW DC Forward Current 50 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5694 REV NO: V.2 DATE: JUN/20/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201003066 Hyper Orange AA5060SEC/J SPEC NO: DSAG5694 REV NO: V.2 DATE: JUN/20/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201003066 AA5060SEC/J Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5694 REV NO: V.2 DATE: JUN/20/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201003066 PACKING & LABEL SPECIFICATIONS AA5060SEC/J SPEC NO: DSAG5694 REV NO: V.2 DATE: JUN/20/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1201003066