SURFACE MOUNT DISPLAY Part Number: ACPSC04-41CGKWA GREEN Description Features 0.4 INCH CHARACTER HEIGHT. The Green source color devices are made with InGaAlP on LOW CURRENT OPERATION. GaAs substrate Light Emitting Diode. HIGH CONTRAST AND LIGHT OUTPUT. EASY MOUNTING ON P.C. BOARDS OR SOCKETS. CATEGORIZED FOR LUMINOUS INTENSITY. MECHANICALLY RUGGED. GRAY FACE,WHITE SEGMENT. PACKAGE : 400PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. RoHS COMPLIANT. Package Dimensions & Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3.The gap between the reflector and PCB shall not exceed 0.25mm SPEC NO: DSAG4360 REV NO: V.2 DATE: MAY/30/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP: 1361000054 Selection Guide Part No. Dice ACPSC04-41CGKWA Iv (ucd) [1] @ 10mA Lens Type GREEN (InGaAIP) WHITE DIFFUSED Description Min. Typ. 3000 11200 Common Cathode, Rt. Hand Decimal. Note: 1. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 574 nm IF=20mA Green 570 nm IF=20mA Spectral Line Half-width Green 20 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.1 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG4360 REV NO: V.2 DATE: MAY/30/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP: 1361000054 Green ACPSC04-41CGKWA SPEC NO: DSAG4360 REV NO: V.2 DATE: MAY/30/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP: 1361000054 ACPSC04-41CGKWA Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG4360 REV NO: V.2 DATE: MAY/30/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP: 1361000054 PACKING & LABEL SPECIFICATIONS ACPSC04-41CGKWA SPEC NO: DSAG4360 REV NO: V.2 DATE: MAY/30/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Joe Lee DRAWN: W.J.ZHU ERP: 1361000054