SURFACE MOUNT DISPLAY PRELIMINARY SPEC ATTENTION Part Number: ACSA08-51PBWA/A Blue OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 0.8INCH DIGIT HEIGHT. The Blue source color devices are made with InGaN z LOW CURRENT OPERATION. on SiC Light Emitting Diode. z EXCELLENT CHARACTER APPEARANCE. Static electricity and surge damage the LEDS. z I.C. COMPATIBLE It is recommended to use a wrist band or anti-electrostatic z MECHANICALLY RUGGED. glove when handling the LEDs. z GRAY FACE,WHITE SEGMENT. All devices, equipment and machinery must be electrically z PACKAGE: 200PCS/ REEL grounded. z MOISTURE SENSITIVITY LEVEL : LEVEL 4. z RoHS COMPLIANT. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. 3. The gap between the reflector and PCB shall not exceed 0.25mm. SPEC NO: DSAG8874 REV NO: V.2 DATE: MAY/29/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1351000566 Selection Guide Part No. Dice ACSA08-51PBWA/A Iv (ucd) [1] @ 10mA Lens Type Blue (InGaN) WHITE DIFFUSED Min. Typ. 3000 12000 Description Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 4.0 V IF=20mA IR Reverse Current Blue 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG8874 REV NO: V.2 DATE: MAY/29/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1351000566 Blue ACSA08-51PBWA/A SPEC NO: DSAG8874 REV NO: V.2 DATE: MAY/29/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1351000566 ACSA08-51PBWA/A Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications (Units : mm) SPEC NO: DSAG8874 REV NO: V.2 DATE: MAY/29/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1351000566 PACKING & LABEL SPECIFICATIONS ACSA08-51PBWA/A SPEC NO: DSAG8874 REV NO: V.2 DATE: MAY/29/2007 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1351000566