KINGBRIGHT AM23ID-F

SOT-23 SURFACE MOUNT LED LAMP
Part Number: AM23ID-F
High Efficiency Red
Features
Description
z SOT-23 PACKAGE SURFACE MOUNT LED LAMP.
The High Efficiency Red source color devices are made
z LOW POWER CONSUMPTION.
with Gallium Arsenide Phosphide on Gallium Phosphide
z LONG LIFE - SOLID STATE RELIABILITY.
Orange Light Emitting Diode.
z PACKAGE: 2000PCS / REEL.
z MOISTURE SENSITIVITY LEVEL : LEVEL 3.
z RoHS COMPLIANT.
Package Dimensions
Notes:
1. All dimensions are in millimeters (inches).
2. Tolerance is ±0.25(0.01") unless otherwise noted.
3. Lead spacing is measured where the lead emerge from the package.
4. Specifications are subject to change without notice.
5.The device has a single mounting surface. The device must be mounted according to the specifications.
SPEC NO: DSAD1245
REV NO: V.8
DATE: MAY/12/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 1 OF 5
ERP: 1202000019
Selection Guide
Part No.
Dice
AM23ID-F
Lens Type
High Efficiency Red (GaAsP/GaP)
RED DIFFUSED
Iv (mcd) [2]
@ 20mA
Viewing
Angle [1]
Min.
Typ.
2θ1/2
4
15
140°
Notes:
1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value.
2. Luminous intensity/ luminous Flux: +/-15%.
Electrical / Optical Characteristics at TA=25°C
Symbol
Parameter
Device
Typ.
λpeak
Peak Wavelength
High Efficiency Red
λD [1]
Dominant Wavelength
Δλ1/2
Max.
Units
Test Conditions
627
nm
IF=20mA
High Efficiency Red
625
nm
IF=20mA
Spectral Line Half-width
High Efficiency Red
45
nm
IF=20mA
C
Capacitance
High Efficiency Red
15
pF
VF=0V;f=1MHz
VF [2]
Forward Voltage
High Efficiency Red
2
2.5
V
IF=20mA
IR
Reverse Current
High Efficiency Red
10
uA
VR=5V
Notes:
1.Wavelength: +/-1nm.
2. Forward Voltage: +/-0.1V.
Absolute Maximum Ratings at TA=25°C
Parameter
High Efficiency Red
Units
Power dissipation
75
mW
DC Forward Current
30
mA
Peak Forward Current [1]
160
mA
5
V
Reverse Voltage
Operating Temperature
-40°C To +85°C
Storage Temperature
-40°C To +85°C
Note:
1. 1/10 Duty Cycle, 0.1ms Pulse Width.
SPEC NO: DSAD1245
REV NO: V.8
DATE: MAY/12/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 2 OF 5
ERP: 1202000019
High Efficiency Red
AM23ID-F
SPEC NO: DSAD1245
REV NO: V.8
DATE: MAY/12/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 3 OF 5
ERP: 1202000019
AM23ID-F
Recommended Soldering Pattern
(Units : mm; Tolerance: ± 0.1)
Tape Specifications
(Units : mm)
SPEC NO: DSAD1245
REV NO: V.8
DATE: MAY/12/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 4 OF 5
ERP: 1202000019
PACKING & LABEL SPECIFICATIONS
AM23ID-F
SPEC NO: DSAD1245
REV NO: V.8
DATE: MAY/12/2007
APPROVED: WYNEC
CHECKED: Allen Liu
DRAWN: Y.L.LI
PAGE: 5 OF 5
ERP: 1202000019