3.2X1.6mm SMD CHIP LED LAMP Part Number: APC3216SGC SUPER BRIGHT GREEN Description Features z3.2X1.6mm SMT LED, 1.1mm THICKNESS. zLOW POWER CONSUMPTION. zWIDE VIEWING ANGLE. zIDEAL with Gallium Phosphide Green Light Emitting Diode. FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE: 2000PCS / REEL . zMOISTURE SENSITIVITY LEVEL : LEVEL 3. zRoHS The Super Bright Green source color devices are made COMPLIANT. Package Dimensions Notes: 1.All dimensions are in millimeters (inches). 2.Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAD1004 REV NO: V.3 DATE: APR/18/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203000985 Selection Guide Dice Part No. APC3216SGC Iv (mcd) [2] @ 20mA Lens Type SUPER BRIGHT GREEN (GaP) Viewing Angle [1] Min. Typ. 2 θ 1/2 4 15 120° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm IF=20mA Super Bright Green 568 nm IF=20mA Spectral Line Half-width Super Bright Green 30 nm IF=20mA C Capacitance Super Bright Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Green 2.2 2.5 V IF=20mA IR Reverse Current Super Bright Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAD1004 REV NO: V.3 DATE: APR/18/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203000985 Super Bright Green APC3216SGC SPEC NO: DSAD1004 REV NO: V.3 DATE: APR/18/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203000985 APC3216SGC Recommended Soldering Pattern (Units : mm; Tolerance: ±0.1) Tape Specifications (Units : mm) SPEC NO: DSAD1004 REV NO: V.3 DATE: APR/18/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203000985 PACKING & LABEL SPECIFICATIONS APC3216SGC SPEC NO: DSAD1004 REV NO: V.3 DATE: APR/18/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.LIU ERP:1203000985