2.0x1.25mm SMD CHIP LED LAMP Part Number: APT2012SRCPRV SUPER BRIGHT RED Features Description z2.0mmx1.25mm zLOW SMT LED,0.75mm THICKNESS. POWER CONSUMPTION. zWIDE zIDEAL Gallium Aluminum Arsenide Red Light Emitting Diode. VIEWING ANGLE. FOR BACKLIGHT AND INDICATOR. zVARIOUS COLORS AND LENS TYPES AVAILABLE. zPACKAGE : 2000PCS / REEL. zMOISTURE zRoHS The Super Bright Red source color devices are made with SENSITIVITY LEVEL : LEVEL 3. COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAB0830 REV NO: V.10 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/24/2007 DRAWN: W.J.HUA PAGE: 1 OF 5 ERP:1203001873 Selection Guide Dice Part No. Lens Type SUPER BRIGHT RED (GaAlAs) APT2012SRCPRV WATER CLEAR Iv (mcd) [2] @ 20mA Viewing Angle [1] Min. Typ. 2θ1/2 36 100 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Red λD [1] Dominant Wavelength Δλ1/2 C Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAB0830 REV NO: V.10 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/24/2007 DRAWN: W.J.HUA PAGE: 2 OF 5 ERP:1203001873 Super Bright Red APT2012SRCPRV SPEC NO: DSAB0830 REV NO: V.10 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/24/2007 DRAWN: W.J.HUA PAGE: 3 OF 5 ERP:1203001873 APT2012SRCPRV Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAB0830 REV NO: V.10 APPROVED: WYNEC CHECKED: Allen Liu DATE: APR/24/2007 DRAWN: W.J.HUA PAGE: 4 OF 5 ERP:1203001873 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAB0830 REV NO: V.10 APPROVED: WYNEC CHECKED: Allen Liu APT2012SRCPRV DATE: APR/24/2007 DRAWN: W.J.HUA PAGE: 5 OF 5 ERP:1203001873