3.2x1.6mm SMD CHIP LED LAMP Part Number: APTR3216ZGC PRELIMINARY SPEC Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 3.2mmx1.6mm SMT LED,1.05mm THICKNESS. The Green source color devices are made with AlInGaN z LOW POWER CONSUMPTION. on Sapphire Light Emitting Diode. z WIDE VIEWING ANGLE. Static electricity and surge damage the LEDS. z IDEAL FOR BACKLIGHT AND INDICATOR. It is recommended to use a wrist band or anti-electrostatic z VAVRIOUS COLORS AND LENS TYPES AVAILABLE. glove when handling the LEDs. z PACKAGE : 2000PCS / REEL. All devices, equipment and machinery must be electrically z MOISTURE SENSITIVITY LEVEL : LEVEL 3. grounded. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH3805 REV NO: V.2 DATE: JUN/26/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 5 ERP: 1203003785 Selection Guide Part No. Dice APTR3216ZGC Iv (mcd) [2] @ 20mA Lens Type Green (AlInGaN) Viewing Angle [1] Min. Typ. 2θ1/2 110 300 120° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 515 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.3 4.1 V IF=20mA IR Reverse Current Green 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 102.5 mW DC Forward Current 25 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating Temperature -40°C To +85°C Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH3805 REV NO: V.2 DATE: JUN/26/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 5 ERP: 1203003785 Green APTR3216ZGC SPEC NO: DSAH3805 REV NO: V.2 DATE: JUN/26/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 5 ERP: 1203003785 APTR3216ZGC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH3805 REV NO: V.2 DATE: JUN/26/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 5 ERP: 1203003785 PACKING & LABEL SPECIFICATIONS APTR3216ZGC SPEC NO: DSAH3805 REV NO: V.2 DATE: JUN/26/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 5 ERP: 1203003785