KINGBRIGHT KB844LA

PHOTOCOUPLER
KB844
GENERAL PURPOSE
HIGH ISOLATION VOLTAGE
SINGLE TRANSISTOR TYPE
PHOTOCOUPLER SERIES
FEATURES
1.AC Input
Vrms)
2.High isolation voltage between input and output (Viso=50000 Vr.m.s)
3.Compact dual-in-line package
KB844:4-channel type
4.Recognized by UL and CUL, file NO. E225308
5.Approved by VDE 0884 Teil2(NO:40006364)
(Creepage distance between input and output:7mm or more)
6.RoHS Compliant.
DESCRIPTION
1.The KB844(4-channel) is optically coupled isolators containing two GaAs light emitting
diode and an NPN silicon phototransistor.
2.The lead pitch is 2.54mm.
APPLICATIONS
1.Computer terminals.
2.Registers, copiers, automatic vending machines.
3.System appliances, measuring instruments.
4.Programmable logic controller.
5.Signal transmission between circuits of different potentials and impedances.
SPEC NO: DSAD1536
APPROVED: J. Lu
REV NO: V.5
CHECKED: Tracy Deng
DATE: MAR/14/2005
DRAWN: S.H.CHEN
PAGE: 1 OF 8
ERP:1205000023
PHOTOCOUPLER
KB844
½PACKAGE DIMENSIONS (UNIT:mm)
DIP Type
KB844
Top View
Internal connection
diagram
2.54 [0.1] 0.25
16
16 15 14 13 12 11 10
1
8
1
9
6.5[0.256]
KB814
KB814
Anode
mark
KB814
KB814
9
2
3
4
5
6
7
8
7.62 [0.3] 0.3
2.7 [0.106]
3.5 [0.138]
0.4[0.015]MIN.
19.82 [0.78]
G
0.5 [0.02] 0.1
G
0.25 [0.01] 0.1
ð= 0 to 13
±
3.0[0.118]
7[0.276]
0.9 [0.035] 0.2
1.2 [0.047] 0.3
1, 3, 5, 7. Anode,Cathode 9, 11, 13, 15. Emitter
2, 4, 6, 8. Anode,Cathode 10, 12, 14, 16. Collector
C)
* Absolute Maximum Ratings (Ta=25±
TOLERANCE : ±0.5[±0.02] UNLESS OTHERWISE NOTED.
Symbol
Parameter
Rating
Forward current
IF
²50
Unit
Power dissipation
P
70
mW
Input
mA
Collector-emitter voltage
V CEO
35
V
Emitter-collector voltage
V ECO
6
V
Collector current
IC
50
mA
Collector power dissipation
PC
150
mW
Ptot
200
mW
Viso
5000
VV
r.m.s
rms
Operating temperature
Topr
-30~+100
Storage temperature
Tstg
-55~+125
Tsol
260
Output
Total power dissipation
*1
*2
Isolation voltage
Soldering temperature
*1
40 to 60%RH, AC for 1 minute
*2
For 10 seconds
SPEC NO: DSAD1536
APPROVED: J. Lu
REV NO: V.5
CHECKED: Tracy Deng
DATE: MAR/14/2005
DRAWN: S.H.CHEN
±C
±C
±C
PAGE: 2 OF 8
ERP:1205000023
PHOTOCOUPLER
KB844
C)
* Electro-optical Characteristics (Ta=25±
Parameter
Symbol
Forward voltage
VF
Input
Peak forward voltage
Output
Collector dark current
VFM
I CEO
CTR
Current transfer ratio
Transfer
characteristics
Collector-emitter saturation voltage
VCE( sat)
Rise time
tr
Fall time
tf
Response time
Min. Typ.
Conditions
I F =²20mA
1.2
I FM =²0.5A
1.4
V
3.0
V
10 -7
A
300
%
0.1
0.2
V
4
18
3
18
VCE =20V,IF =0mA
I F=²1mA, VCE=5V
20
I F =²20mA, IC=1mA
R L=100è
VCE=2V, I C=2mA
Max. Unit
ô
ô
Classification table of current transfer ratio is shown below.
Ic
CTR= I F X 100%
Model NO.
Rank mark
CTR(%)
KB844L
L
20~60
KB844A
A
50~150
KB844B
B
120~300
KB844LA
L or A
20~150
KB844AB
A or B
50~300
KB844
L,A,B or No mark
20~300
SPEC NO: DSAD1536
APPROVED: J. Lu
REV NO: V.5
CHECKED: Tracy Deng
DATE: MAR/14/2005
DRAWN: S.H.CHEN
PAGE: 3 OF 8
ERP:1205000023
PHOTOCOUPLER
KB844
Fig. 1 Current Transfer Ratio vs.
Forward Current
Fig. 2 Forward Current vs.
Forward voltage
Fig. 3 Collector Current vs.
Collector-emitter Voltage
Fig. 4 Relative Current Transfer Ratio
vs. Ambient Temperature
Fig. 5 Collector-emitter Saturation
Voltage vs. Ambient Temperature
Fig. 6 Collector Dark Current vs.
Ambient Temperature
SPEC NO: DSAD1536
APPROVED: J. Lu
REV NO: V.5
CHECKED: Tracy Deng
DATE: MAR/14/2005
DRAWN: S.H.CHEN
PAGE: 4 OF 8
ERP:1205000023
PHOTOCOUPLER
KB844
Fig. 7 Forward Current vs.
Ambient Temperature
Fig. 9 Response Time vs.
Load Resistance
Fig. 8 Collector Power Dissipation vs.
Ambient Temperature
Test Circuit for Response Time
KΩ
Fig. 10 Frequency Response
Test Circuit for Frequency Response
Ω
Ω
SPEC NO: DSAD1536
APPROVED: J. Lu
Ω
REV NO: V.5
CHECKED: Tracy Deng
DATE: MAR/14/2005
DRAWN: S.H.CHEN
PAGE: 5 OF 8
ERP:1205000023
PHOTOCOUPLER
KB844
Fig. 11 Collector-emitter Saturation
Voltage vs. Forward Current
* NOTES ON HANDLING
1.Recommended soldering conditions (Dip soldering)
(1) Dip soldering
Temperature
260 °C or below (molten solder temperature)
Time
Less than 10 seconds.
Cycle
One cycle allowed to be dipped in solder including plastic nold portion.
Flux
Rosin flux containing small amount of chlorine
(The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
(2) Cautions
Fluxes
Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
2.Cautions regarding noise
Be aware that power is suddenly into the component any surge current may cause damage happen,
even if the voltage is within the absolute maximum ratings.
SPEC NO: DSAD1536
APPROVED: J. Lu
REV NO: V.5
CHECKED: Tracy Deng
DATE: MAR/14/2005
DRAWN: S.H.CHEN
PAGE: 6 OF 8
ERP:1205000023
PHOTOCOUPLER
KB844
CAUTION
Within this device there exists GaAs (Gallium Arsenide) material which is a harmful substance if ingested.
GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them.
RESTRICTIONS ON PRODUCT USE
The information in this document is subject to change without notice. Before using this
document, please confirm that this is the latest version. Not all devices / types available
in every country.
We are mention about our product quality stablity, semiconductor devices in general can
malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical
stress. It is the responsibility of the buyer, when utilizing KINGBRIGHT products, to observe
standards of safety, and to a avoid situations in which a malfunction or failure of a
KINGBRIGHT product could cause loss of human life, bodily injury or damage to property.
In developing your designs, please ensure that KINGBRIGHT products are used within
specified operating ranges as set forth in the most recent products specifications.
SPEC NO: DSAD1536
APPROVED: J. Lu
REV NO: V.5
CHECKED: Tracy Deng
DATE: MAR/14/2005
DRAWN: S.H.CHEN
PAGE: 7 OF 8
ERP:1205000023
PHOTOCOUPLER
KB844
TOLERANCE : ² 0.4[ ²0.012] UNLESS OTHERWISE NOTED.
Dimension of Tube
Unit:mm
Dimension of Carton
Part Number
Package
Packing Style
KB844
16-pin DIP
25pcs / each tube
SPEC NO: DSAD1536
APPROVED: J. Lu
REV NO: V.5
CHECKED: Tracy Deng
DATE: MAR/14/2005
DRAWN: S.H.CHEN
PAGE: 8 OF 8
ERP:1205000023