8.89mmx3.81mm LED LIGHT BAR Part Number: KB-D100SRW Super Bright Red Features Description z UNIFORM LIGHT EMITTING AREA. The Super Bright Red source color devices are made with z LOW CURRENT OPERATION Gallium Aluminum Arsenide Red Light Emitting Diode. z EASILY MOUNTED ON P.C.BOARDS. z FLUSH MOUNTABLE. z EXCELLENT ON/OFF CONTRAST. z CAN BE USED WITH PANELS AND LEGEND MOUNTS. z CATEGORIZED FOR LUMINOUS INTENSITY. z RoHS COMPLIANT. Package Dimensions& Internal Circuit Diagram Notes: 1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted. 2. Specifications are subject to change without notice. SPEC NO: DSAA9424 REV NO: V.10 APPROVED: WYNEC CHECKED: Joe Lee DATE: MAY/14/2007 DRAWN: Y.L.LI PAGE: 1 OF 4 ERP: 1334000243 Selection Guide Part No. Dice KB-D100SRW Iv (mcd) [1] @ 20mA Lens Type Super Bright Red (GaAlAs) WHITE DIFFUSED Min. Typ. 36 100 Note: 1. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Super Bright Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 660 nm IF=20mA Super Bright Red 640 nm IF=20mA Spectral Line Half-width Super Bright Red 20 nm IF=20mA C Capacitance Super Bright Red 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Super Bright Red 1.85 2.5 V IF=20mA IR Reverse Current Super Bright Red 10 uA VR=5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Super Bright Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 155 mA 5 V Reverse Voltage Operating / Storage Temperature Lead Solder Temperature[2] -40°C To +85°C 260°C For 3-5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. SPEC NO: DSAA9424 REV NO: V.10 APPROVED: WYNEC CHECKED: Joe Lee DATE: MAY/14/2007 DRAWN: Y.L.LI PAGE: 2 OF 4 ERP: 1334000243 Super Bright Red KB-D100SRW SPEC NO: DSAA9424 REV NO: V.10 APPROVED: WYNEC CHECKED: Joe Lee DATE: MAY/14/2007 DRAWN: Y.L.LI PAGE: 3 OF 4 ERP: 1334000243 PACKING & LABEL SPECIFICATIONS SPEC NO: DSAA9424 REV NO: V.10 APPROVED: WYNEC CHECKED: Joe Lee KB-D100SRW DATE: MAY/14/2007 DRAWN: Y.L.LI PAGE: 4 OF 4 ERP: 1334000243