® Kingbright 3.2x1.6mm SMD CHIP LED LAMPS KP-3216 Package Dimensions Features l3.2mmx1.6mm SMT LED. 1.1mm THICKNESS. POWER CONSUMPTION. lWIDE VIEWING ANGLE. lIDEAL FOR BACKLIGHT AND INDICATOR. lVARIOUS COLORS AND LENS TYPES AVAILABLE. lLOW 1 Description The Bright Red source color devices are made with Gallium Phosphide Red Light Emitting Diode. The Super Bright Green source color devices are made with Gallium Phosphide Green Light Emitting Diode. The High Efficiency Red source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Orange Light Emitting Diode. The Yellow source color devices are made with Gallium Arsenide Phosphide on Gallium Phosphide Yellow Light Emitting Diode. The Super Bright Red source color devices are made with Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2.(0.0079") unless otherwise noted. 3. Lead spacing is measured where the lead emerge package. 4. Specifications are subjected to change without notice. Gallium Aluminum Arsenide Red Light Emitting Diodes. Selection Guide Part No. KP-3216HD KP-3216HC KP-3216HT KP-3216ID KP-3216EC KP-3216IT KP-3216YD KP-3216YC KP-3216YT KP-3216SRD KP-3216SRC KP-3216SRT KP-3216SGD KP-3216SGC KP-3216SGT Dice Lens Type BRIGHT RED (GaP) BRIGHT RED (GaP) BRIGHT RED (GaP) HIGH EFFICIENCY RED (GaAsP/GaP) HIGH EFFICIENCY RED (GaAsP/GaP) HIGH EFFICIENCY RED (GaAsP/GaP) YELLOW (GaAsP/GaP) YELLOW (GaAsP/GaP) YELLOW (GaAsP/GaP) SUPER BRIGHT RED (GaAlAs) SUPER BRIGHT RED (GaAlAs) SUPER BRIGHT RED (GaAlAs) SUPER BRIGHT GREEN (GaP) SUPER BRIGHT GREEN (GaP) SUPER BRIGHT GREEN (GaP) RED DIFFUSED WATER CLEAR RED TRAS. RED DIFFUSED WATER CLEAR RED TRANS. YELLOW DIFFUSED WATER CLEAR YELLOW TRANS. RED DIFFUSED WATER CLEAR RED TRANS. GREEN DIFFUSESD WATER CLEAR GREEN TRNS. Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 1-KP-3216 Iv (mcd) @ 20 mA Viewing Angle Min. Typ. 2θ1/2 0.8 0.8 0.8 5 5 5 3.2 3.2 3.2 40 40 40 3.2 3.2 3.2 1.25 1.25 1.2 12.5 12.5 12.5 8 8 8 70 70 70 12.5 12.5 12.5 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° 120° Electrical / Optical Characteristics at T A=25°C Symbol Parameter Device λpeak Peak Wavelength Bright Red High Efficiency Red Yellow Super Bright Red Super Bright Green ∆λ1/2 Spectral Line Halfwidth C Typ. Max. Units Test Conditions 700 625 590 660 565 nm IF=20mA Bright Red High Efficiency Red Yellow Super Bright Red Super Bright Green 45 45 35 20 30 nm IF=20mA Capacitance Bright Red High Efficiency Red Yellow Super Bright Red Super Bright Green 40 12 10 95 45 pF VF=0V;f=1MHz vF Forward Voltage Bright Red High Efficiency Red Yellow Super Bright Red Super Bright Green 2.0 2.0 2.1 1.85 2.2 V IF=20mA IR Reverse Current All uA VR = 5V 2.5 2.5 2.5 2.5 2.5 10 Absolute Maximum Ratings at T A=25°C Bright Red High Efficiency Red Yellow Super Bright Red Super Bright Green Units Power dissipation 105 105 105 100 105 mW DC Forward Current 25 30 30 30 25 mA Peak Forward Current [1] 150 150 150 150 150 mA 5 5 5 5 5 V Parameter Reverse Voltage -40 °C To +85 °C Operating/Storage Temperature Lead Soldering Temperature [2] 230 °C For 3 Seconds Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 1-KP-3216 Bright Red KP-3216HD, KP-3216HC, KP-3216HT 1 High Efficiency Red KP-3216ID, KP-3216EC, KP-3216IT 1-KP-3216 Yellow KP-3216YD, KP-3216YC, KP-3216YT Super Bright Red KP-3216SRD, KP-3216SRC, KP-3216SRT 1-KP-3216 Super Bright Green KP-3216SGD, KP-3216SGC, KP-3216SGT 1 KP-3216 Series SMT Reflow Soldering Instructions 1-KP-3216 KP-3216 Series Recommended Soldering Pattern KP-3216 Series Tape Specifications (Units : mm) 1-KP-3216