T-1 3/4 (5mm) SOLID STATE LAMP PRELIMINARY SPEC Part Number: WP7083SED/J HYPER ORANGE Features Description z OUTSTANDING MATERIAL EFFICIENCY. The Super Bright device is based on light emitting diode chip z RELIABLE AND RUGGED. made from AlInGaP. z I.C. COMPATIBLE. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG5883 REV NO: V.3 DATE: JUN/18/2007 PAGE: 1 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1101021237 Selection Guide Part No. Dice WP7083SED/J Lens Type HYPER ORANGE (AlInGaP) Viewing Angle [1] Iv (mcd) [2] @ 20mA ORANGE DIFFUSED Min. Typ. 2θ1/2 2200 3700 60° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Hyper Orange λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 640 nm IF=20mA Hyper Orange 630 nm IF=20mA Spectral Line Half-width Hyper Orange 25 nm IF=20mA C Capacitance Hyper Orange 27 pF VF=0V;f=1MHz VF [2] Forward Voltage Hyper Orange 2.2 2.8 V IF=20mA IR Reverse Current Hyper Orange 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Orange Units Power dissipation 84 mW DC Forward Current 30 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAG5883 REV NO: V.3 DATE: JUN/18/2007 PAGE: 2 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1101021237 Hyper Orange WP7083SED/J SPEC NO: DSAG5883 REV NO: V.3 DATE: JUN/18/2007 PAGE: 3 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1101021237 PACKING & LABEL SPECIFICATIONS WP7083SED/J SPEC NO: DSAG5883 REV NO: V.3 DATE: JUN/18/2007 PAGE: 4 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1101021237 SPEC NO: DSAG5883 REV NO: V.3 DATE: JUN/18/2007 PAGE: 5 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1101021237 SPEC NO: DSAG5883 REV NO: V.3 DATE: JUN/18/2007 PAGE: 6 OF 6 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: W.J.HUA ERP: 1101021237