7.6mmX7.6mm SUPER FLUX LED LAMP Part Number: WP76761CSURC HYPER RED Features Description zSUPER FLUX OUTPUT. The Hyper Red source color devices are made with DH zDESIGN FOR HIGH CURRENT OPERATION. InGaAlP on GaAs substrate Light Emitting Diode. zOUTSTANDING MATERIAL EFFICIENCY. zRELIABLE AND RUGGED. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAG9479 REV NO: V.1 DATE: NOV/04/2006 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101007180 Selection Guide Dice Part No. Iv (mcd) [2] @ 20mA *70mA Lens Type Min. WP76761CSURC HYPER RED (InGaAlP) Typ. 900 2000 *3300 *7000 WATER CLEAR Viewing Angle [1] 2 θ 1/2 20° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. * Luminous intensity with asterisk is measured at 70mA under 40ms pulse width; Luminous intensity / luminous flux: +/-15%. 3.Drive current between 10mA and 30mA are recommended for long term performance. 4.Operation at current below 10mA is not recommended. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Min. Typ. Max. Units Test Conditions λpeak Peak Wavelength Hyper Red 640 nm IF=20mA λD [1] Dominant Wavelength Hyper Red 628 nm IF=20mA Δλ1/2 Spectral Line Half-width Hyper Red 27 nm IF=20mA C Capacitance Hyper Red 45 pF VF=0V;f=1MHz V IF=20mA uA VR = 5V VF [2] IR Forward Voltage Reverse Current Hyper Red 1.6 1.8 1.8 2.0 2.0 2.2 2.2 2.4 2.4 2.6 Hyper Red 10 Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Hyper Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 185 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAG9479 REV NO: V.1 DATE: NOV/04/2006 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101007180 Hyper Red WP76761CSURC SPEC NO: DSAG9479 REV NO: V.1 DATE: NOV/04/2006 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101007180 PACKING & LABEL SPECIFICATIONS WP76761CSURC WP7676C1xxx SPEC NO: DSAG9479 REV NO: V.1 DATE: NOV/04/2006 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101007180