8mm ROUND LED LAMP Part Number: WP793GD Green Features Description z8mm DIAMETER BIG LAMP. The Green source color devices are made with Gallium zWIDE VIEWING ANGLE. Phosphide Green Light Emitting Diode. zI.C.COMPATIBLE. zRELIABLE AND RUGGED. zLONG LIFE-SOLID STATE RELIABILITY. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2464 REV NO: V.3 DATE: MAY/10/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1101007303 Selection Guide Part No. Dice WP793GD Lens Type Green (GaP) Viewing Angle [1] Iv (mcd) [2] @ 20mA GREEN DIFFUSED Min. Typ. 2θ1/2 18 60 30° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 565 nm IF=20mA Green 568 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 15 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 2.2 2.5 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units 62.5 mW DC Forward Current 25 mA Peak Forward Current [1] 140 mA 5 V Power dissipation Reverse Voltage Operating/Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2464 REV NO: V.3 DATE: MAY/10/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1101007303 Green WP793GD SPEC NO: DSAF2464 REV NO: V.3 DATE: MAY/10/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1101007303 PACKING & LABEL SPECIFICATIONS WP793GD SPEC NO: DSAF2464 REV NO: V.3 DATE: MAY/10/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1101007303 SPEC NO: DSAF2464 REV NO: V.3 DATE: MAY/10/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1101007303 SPEC NO: DSAF2464 REV NO: V.3 DATE: MAY/10/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1101007303