T-1(3mm) ROUND LED LAMP Part Number: WP937IID High Efficiency Red Features Description z UNIFORM LIGHT OUTPUT. The High Efficiency Red source color devices are made z LOW POWER CONSUMPTION. with Gallium Arsenide Phosphide on Gallium Phosphide z I.C. COMPATIBLE. Orange Light Emitting Diode. z LONG LIFE - SOLID STATE RELIABILITY. z RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAF2633 REV NO: V.2 DATE: MAY/11/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 1 OF 6 ERP: 1101008580 Selection Guide Part No. Dice Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 7 20 7 20 High Efficiency Red (GaAsP/GaP) WP937IID RED DIFFUSED High Efficiency Red (GaAsP/GaP) Viewing Angle [1] 2θ1/2 60° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity/ luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength High Efficiency Red λD [1] Dominant Wavelength Δλ1/2 Max. Units Test Conditions 627 nm IF=20mA High Efficiency Red 625 nm IF=20mA Spectral Line Half-width High Efficiency Red 45 nm IF=20mA C Capacitance High Efficiency Red 15 pF VF=0V;f=1MHz VF [2] Forward Voltage High Efficiency Red 2 V IF=20mA 2.5 Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter High Efficiency Red Units Power dissipation 75 mW DC Forward Current 30 mA Peak Forward Current [1] 160 mA Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAF2633 REV NO: V.2 DATE: MAY/11/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 2 OF 6 ERP: 1101008580 WP937IID High Efficiency Red SPEC NO: DSAF2633 REV NO: V.2 DATE: MAY/11/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 3 OF 6 ERP: 1101008580 PACKING & LABEL SPECIFICATIONS WP937IID SPEC NO: DSAF2633 REV NO: V.2 DATE: MAY/11/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 4 OF 6 ERP: 1101008580 SPEC NO: DSAF2633 REV NO: V.2 DATE: MAY/11/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 5 OF 6 ERP: 1101008580 SPEC NO: DSAF2633 REV NO: V.2 DATE: MAY/11/2007 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: Y.L.LI PAGE: 6 OF 6 ERP: 1101008580