GB-232 SERIES Round Type, Flangeless Short Lead LED Lamps (3mm) DESCRIPTION: PACKAGE DIMENSIONS The 232 series is widely used in general purpose indicator applications. It is in popular 3mm diameter package, without flange and short lead frame. The semi-conductor materials used are: GaP for (232HD/HT, 232GC/GD/GT) GaAsP/GaP for (232RHC/RHD/RHT, 232YC/YD/YT and 232SD) Unit: mm Tol: +/- 0.2mm φ3.0 φ3.0 o 5.2 ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Reverse Voltage Reverse Current (Vr =5V) Operating Temperature Range Storage Temperature Range Lead Soldering Temperature (1.6mm (1/16)From Body) 1.0 Max. 5 Volt 100µA -40oC To 85oC -40oC To 100oC 260oC For 5 Seconds 17.5 Min. 0.5 1.0 NOTES : 1. All dimensions are in millimeters. 2. Lead spacing is measured where the leads emerge from the package. 3. Protuded resin under flange is 1.5 mm (0.059") Max. 4. Specifications are subject to change without notice. 2.54 o PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Part No. Emitted Color Lens Color Peak Wavelength λp (nm) GB-232HD Red Red Diffused Bright Red GB-232GD View Angle 2θ1/2(Deg) Vf (v) Min Max Rec. If (mA). Iv (mcd) Min Typ. 697 1.7 2.6 10-20 5.0 7.0 30 Red Diffused 660 1.7 2.6 10-20 30.0 40.0 30 Green Green Diffused 565 1.7 2.6 10-20 20.0 30.0 30 GB-232YD Yellow Yellow Diffused 585 1.7 2.6 10-20 15.0 20.0 30 GB-232SD Orange Orange Diffused 610 1.7 2.6 10-20 15.0 20.0 30 GB-232HT Red Red Trans. 697 1.7 2.6 10-20 7.0 9.0 20 Bright Red Red Trans. 660 1.7 2.6 10-20 35.0 50.0 20 GB-232GT Green Green Trans. 565 1.7 2.6 10-20 35.0 50.0 20 GB-232YT Yellow Yellow Trans. 585 1.7 2.6 10-20 30.0 40.0 20 Bright Red Water Clear 660 1.7 2.6 10-20 40.0 60.0 20 GB-232GC Green Water Clear 565 1.7 2.6 10-20 50.0 70.0 20 GB-232YC Yellow Water Clear 585 1.7 2.6 10-20 40.0 60.0 20 GB-232RHD GB-232RHT GB-232RHC TESTING CONDITION FOR EACH PARAMETER : PARAMETER: REVERSE VOLTAGE REVERSE CURRENT FORWARD VOLTAGE LUMINOUS INTENSITY VIEWING ANGLE RECOMMENDED OPERATING CURRENT SYMBOL Vr Ir Vf Iv 2θ1/2 If (Rec) 0o UNIT VOLT µA VOLT MCD DEGREE mA TEST CONDITION Vr = 5.0 Volt If = 20mA If = 20mA If = 20mA 10o 20o 30o D 40o 1.0 C,T 0.9 50o 0.8 60o 70o 0.7 80o 90o 0.5 0.3 0.1 0.2 0.4 SPATIAL DISTRIBUTION 0.6