GB-IR333 SERIES Infrared Emitting Diodes (5mm) DESCRIPTION: PACKAGE DIMENSIONS The IR333 series is high power solution infrared emitting diodes encapsulated in blue transparent or water clear plastic package. These products have high radiant intensity and are suitable for pulsed applications. Unit: mm Tol: +/- 0.2mm 5.9 φ5.0 o 8.6 ABSOLUTE MAXIMUM RATINGS: (Ta=25 C) Max Parameter 5 Volt Reverse Voltage 100µA Reverse Current (Vr =5V) 35mA Continuous Forward Current 100mA Peak Forward Current (1-10 Duty Cycle, 0.1ms Pulse Width) -40oC To +85oC Operating Temperature Range -55oC To +100oC Storage Temperature Range o Lead Soldering Temperature 1.6mm(.06") from body 260 C for 5 seconds 1.0 1.0 Max. 25.4 Min. 0.5 1.0 NOTES : 1. All dimensions are in millimeters. 2. Lead spacing is measured where the leads emerge from the package. 3. Protuded resin under flange is 1.5 mm (0.059") Max. 4. Specifications are subject to change without notice. 2.54 o PART NO. SELECTION AND APPLICATION INFORMATION (RATINGS AT 25 C AMBIENT) Chips Part No. GB-IR333A21C GB-IR333A21BT GB-IR333A31C GB-IR333A31BT GB-IR333A51C GB-IR333A51BT GB-IR333B21C GB-IR333B21BT GB-IR333B31C GB-IR333B31BT GB-IR333B51C GB-IR333B51BT GB-IR333C21C GB-IR333C21BT GB-IR333C31C GB-IR333C31BT GB-IR333C51C GB-IR333C51BT Raw Material AlGaAs AlGaAs AlGaAs AlGaAs AlGaAs AlGaAs Lens Color W.C. Peak Spectral Wave Line Power Length Half-Width Dissipation λp (nm) ∆λ (nm) PD (mW) 20 20 15.0 30.0 20 940 60 95 1.2 1.5 20 20 10.0 20.0 30 940 60 95 1.2 1.5 20 20 4.0 9.0 50 880 70 95 1.3 1.6 20 20 17.7 30.8 20 880 70 95 1.3 1.6 20 20 11.8 20.5 30 880 70 95 1.3 1.6 20 20 5.0 10.0 50 850 60 95 1.5 1.8 20 20 15 37.5 20 850 60 95 1.5 1.8 20 20 10.0 25.0 30 850 60 95 1.5 1.8 20 20 5.0 12.0 50 B.T. AlGaAs W.C. B.T. AlGaAs W.C. B.T. AlGaAs W.C. Typ. 1.5 B.T. W.C. Min 1.2 B.T. W.C. Typ. 95 B.T. W.C. Min Max Typical Viewing Angle 2θ1/2(Deg) 60 B.T. W.C. Terminal Radiant Rec. Capacitance Intensity Ct (pF) If (mA). Ie (mW/Sr) 940 B.T. W.C. Forward Voltage Vf (v) B.T. (W.C. = Water Clear) (B.T. = Blue Transparent) TESTING CONDITION FOR EACH PARAMETER : Parameter 0o Symbol Unit Test Condition Vf V If=20mA Peak Emission Wave Length λρ nm If=20mA Spectral Line Half-Width ∆λ nm If=20mA 1.0 Reverse Current Ir mA Vr=5V 0.9 Radiant Intensity Ie mW/Sr If=20mA Ct pF f=1MHz 2θ1/2 Deg Forward Voltage Terminal Capacitance View Angle 10o 20o 30o 40o 50o 0.8 60o 70o 0.7 80o 90o 0.5 0.3 0.1 0.2 0.4 0.6 SPATIAL DISTRIBUTION