Marktech Low Current 3mm LEDs Features Optimized for low D.C. current CMOS and TTL compatible Excellent brightness at 2mA Color diffused package Series Line−Up Part Number Color Material MT4093−G(2mA) Green GaP MT4093−HR(2mA) High Efficency Red GaAsP MT4093−UR(2mA) Super Ultra Bright Red GaAlAs MT4093−Y(2mA) Yellow GaAsP Maximum Ratings (Ta=25oC) Part Number Forward Current Reverse Voltage Power Dissipation Operating Temperature Storage Temperature IF VR PD Topr Tstg MT4093−G(2mA) 25 5 105.00 −40 ~ +85 −40 ~ +85 MT4093−HR(2mA) 30 5 105.00 −40 ~ +85 −40 ~ +85 MT4093−UR(2mA) 30 5 105.00 −40 ~ +85 −40 ~ +85 MT4093−Y(2mA) 30 5 105.00 −40 ~ +85 −40 ~ +85 Unit mA V mW Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 o C Web: www.marktechopto.com | Email: [email protected] o C West Coast Sales Office 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314 Marktech Low Current 3mm LEDs o Electrical and Optical Characteristics (Ta=25 C) Part Number PWL nm λP MT4093−G(2mA) MT4093−HR(2mA) MT4093−UR(2mA) MT4093−Y(2mA) − 565 625 660 590 nm Material GaP View Angle 2θ1/2 60 GaAsP GaAlAs GaAsP − 60 60 60 o o o o deg Luminous Intensity Iv min. typ. max. Forward Voltage VF IF@ min. typ. max. Rev Current IR IF@ max. VR@ .80 − 3.20 2mA − 2.20 2.50 20mA 10 5V .80 − 5.00 2mA − 2.00 2.50 20mA 10 5V 8.00 − 20.00 2mA − 1.85 2.50 20mA 10 5V .80 − 3.20 2mA − 2.10 2.50 20mA 10 5V mcd − V − µA − NOTES: • All Dimensions are in millimeters. • Tolerance is ±0.25mm unless otherwise stated. • An Epoxy Meniscus may extend about 1mm down the leads. • Burr around bottom of epoxy may be around 0.5mm MAX. • Specifications are subject to change without notice. Company Headquarters 3 Northway Lane North Latham, New York 12110 Toll Free: 800.984.5337 Fax: 518.785.4725 Web: www.marktechopto.com | Email: [email protected] West Coast Sales Office 950 South Coast Drive, Suite 265 Costa Mesa, California 92626 Toll Free: 800.984.5337 Fax: 714.850.9314