RF SILICON AND SUBSYSTEMS SOLUTIONS FOR BROADBAND COMMUNICATIONS AND AUTOMOTIVE ELECTRONICS MT145X SERIES AM/FM TUNER MODULES PRODUCT BRIEF The MT145x series tuner modules, supporting world standards, are designed for high-end automotive radios with digital IF. MT145x Series Tuner Module The MT145x Series AM/FM Tuner Modules are designed specifically for high-end automotive radio and mobile entertainment systems. They are optimized to meet the performance, market and pricing demands of automotive OEM customers. Supporting the various AM/FM frequency allocations in the US, Europe and Asia (including Japan) the tuner modules offer worldwide functionality. The 10.7 MHz IF output interfaces with a dedicated DSP (e.g. STMicroelectronics TDA7580 or TDA7581) to form a DSP-based digital AM/FM radio. New broadcasting standards like HD-Radio™ or DRM are supported as an option. In addition, a FM-only version of the tuner is available in order to add highly sophisticated features like FM phase diversity to the system. MT145x modules also incorporate a high-performance fast PLL for inaudible checking of alternative frequencies within RDS networks. For FM mode, a keyed AGC function is implemented to prevent receiver desensitization due to erroneous AGC response while in AM mode, a narrow band filter improves selectivity. Superb sensitivity is also provided for MW/LW/SW reception. Moreover the modules feature an automatic alignment for the tracking filter and the image rejection filters. All alignment data is stored on an onboard EEPROM which can be accessed by a serial bus interface like all the other tuner functions. The MT145x series modules were qualified under typical automotive operating conditions and fully comply with RoHS requirements. Modules are available in a shielded horizontal (optional vertical) housing. APPLICATIONS • High-end automotive entertainment system featuring AM/FM, HD Radio™ or DRM FEATURES FM • • • • • • • • Down conversion High-performance fast PLL for inaudible RDS updating Programmable controlled IFgain stage Passive FM stage with prefilter Adjustable image rejection mixer Ceramic 10.7 MHz IF filtering Automatic alignment Keyed AGC selectable AM • • • • • Up conversion IF-crystal filter for high selectivity AM Dual AGC (Cascode and PIN) Keyed AGC selectable DRM upon request GENERAL • • • • • • • All functions controlled via serial bus. World standard functionality High integration and shielded housing On-board EEPROM. Variable IF output gain Lead-free and RoHS compliant Single power supply MT145X SERIES AM/FM TUNER MODULES PRODUCT BRIEF RECOMMENDED OPERATING CONDITIONS PARAMETER 8.5 V Power Supply Current AM mode Current FM mode Voltage Operating Temperature Parametric temperature range Storage temperature MIN TYP ELECTRICAL CHARACTERISTICS* MAX 80 75 8.5 -40 -40 UNIT PARAMETER mA mA V 85 105 °C °C MAX UNIT INPUT/OUTPUT CHARACTERISTICS PARAMETER Antenna Input Input Capacitance, AGC inactive Input Conductance, AGC inactive Input Impedance, AGC inactive VSWR, AGC inactive Keyed AGC Input SDA SCL MIN TYP 50 1 50 1.7 pF mS Ω VSWR V SDA and SCL HIGH and LOW levels are specified according to a 3.3V serial-Bus. The bus pins also tolerate thresholds of a 5V bus. Intermediate Frequency Output Output Frequency Output impedance Reference Input Frequency 10.7 60 100 MHz Ω KHz DIMENSIONS* PARAMETER MEASUREMENT UNIT 63.0 39.0 15.7 mm mm mm Length Width Heigth MIN TYP Receiving frequency range (depends on version) AM Mode USA 520 FM Mode USA 87.7 AM LW Mode Europe 144 AM MW Mode Europe 531 AM SW Mode Europe 5735 FM Mode Europe 87.5 FM Mode Japan 76 AM MW Mode Japan 520 AM SW Mode Japan 5730 AM Parameters Sensitivity: RF level for 15 20dB SINAD S+N/N at RF input = 62 60dBµV Selectivity ± 10 KHz 44 Image rejection IF1 = tuned 88 frequency + 21.4MHz IF rejection (10.7MHz) 82 THD+N at RF input = -50 100dBµV, m = 80% FM Parameters (EU/USA) Sensitivity: RF level for 30dB SINAD; 75 KHz FM; 6.3 1KHz audio S+N/N (Mono) at RF input = 70 60dBµV Selectivity ± 300 KHz 65 THD+N at RF input = -51 100dBµV Image rejection IF1 = tuned 90 frequency + 21.4 MHz IF rejection (10.7MHz) 100 MAX UNIT 1720 107.9 279 1620 6290 108 90 1720 6295 KHz MHz KHz KHz KHz MHz MHz KHz KHz dBµV dB dB dB dB dB dBµV dB dB dB dB dB * The electrical characteristics are on standard flat settings of the demodulator/DSP and do not incorporate weak signal processing, dynamic bandwidth processing and de-emphasis filtering *All inputs/outputs via pins; number of pins is 2x9; pin grid is 2.54 mm MT145x AM/FM Antenna IF Out AM/FM Tuner keyed AGC ADC Car DSP (e.g. TDA 7580) Reference Frequency EEPROM PLL Power Supply Serial Bus Interface 8.5V SCL SDA MT145x Block Diagram Microtune, Inc., 2201 Tenth Street, Plano, TX 75074, USA Tel: +1-972-673-1600, Fax: +1-972-673-1602, E-mail: [email protected], Web site: www.microtune.com For a detailed list of office locations, sales offices, and sales representatives, visit our Web site at www.microtune.com The information in this document is believed to be accurate and reliable. Microtune assumes no responsibility for any consequences arising from the use of this information, nor from any infringement of patents or the rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or other rights of Microtune. The information in this publication replaces and supersedes all information previously supplied, and is subject to change without notice. The customer is responsible for assuring that proper design and operating safeguards are observed to minimize inherent and procedural hazards. Microtune assumes no responsibility for applications assistance or customer product design. The devices described in this document are not authorized for use in medical, life-support equipment, or any other application involving a potential risk of severe property or environmental damage, personal injury, or death without prior express written approval of Microtune. Any such use is understood to be entirely at the user’s risk. Microtune is a registered trademark of Microtune, Inc. MicroTuner, MicroStreamer, VideoCaster, DataCaster, ClearTune, and the Microtune logo are trademarks of Microtune, Inc. All other trademarks belong to their respective companies. Microtune’s products are protected by one or more of the following U.S. patents: 5,625,325; 5,648,744; 5,717,730; 5,737,035; 5,739,730; 5,805,988; 5,847,612; 6,100,761; 6,104,242; 6,163,684; 6,169,569; 6,172,378; 6,177,964; 6,211,745; 6,218,899; 6,268,778; 6,310,387; 6,323,736; 6,355,537; 6,429,502; 6,462,327; 6,535,068; 6,580,313; 6,608,522; 6,631,257; 6,714,776; 6,725,463; 6,744,308; 6,771,124; 6,784,945; 6,804,099; 6,888,406; 6,891,435; 6,906,594; 6,909,886; 6,919,774; 6,920,182; 6,922,556; 6,963,478; 6,973,288; 6,993,310; 7,035,614; 7,078,960; 7,079,195; 7,164,899; 7,171,176; 7,184,724; D469,742 and additional patents pending or filed. Entire contents Copyright © 1996 - 2007 Microtune, Inc. MT145x PB-00140 — Rev 1.0 030207 March, 2007