13 - 18 GHz 0.5W QFN Plastic Packaged Power Amplifier February 2007 - Rev 27-Feb-07 CMQ1631-QH Features 30 dBm Saturated Output Power Between 15.5~17.5 Ghz 21 dB (Typ) Linear Gain Unconditionally Stable Low Cost, Surface Mount Package 4mm x 4mm x 1.4mm RoHS Compliant 7 V, 770 mA Applications Military Ku Band VSAT Point to Point Radio Ku-Band Space General Description The CMQ1631-QH is a pHEMT power amplifier packaged in a 4X4 QFN plastic package. The CMQ1631-QH is self contained with 50 ohm input and output matching. The CMQ1631-QH is unconditionally stable and the internal matching allows for a reduction in external components making this product a simple and low cost solution. RoHS compliance and standard surface mount package make it an ideal solution in all manufacturing environments. The power amplifier is intended for use in the extended Ku-Band satellite applications. Electrical Characteristics Parameter Symbol Min Typ Max Min Typ Max Min Typ Max Units Operating Frequency Drain Current Drain Voltage Gate Voltage (RF ON) Linear Gain Input/Outpu VSWR Noise Figure Saturated Output Power Power @ 1dB Compression Gain Gate Current F Id Vd Vg S21 VSWR NF Psat P1dB Igs 13 6 -2 - 17.5 14.5 14.5 700 700 8 7 6 7 -0.2 -0.2 -2 21 20 2.0:1 3:1 2.0:1 6 6 30 28 29 27.5 0.5 5 0.5 5 - 18 17.5 6 -2 - 700 7 21 6 29 28 0.5 Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com 8 -0.2 5 GHz mA Volts Volts dB dB dB dBm dBm mA Page 1 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 13 - 18 GHz 0.5W QFN Plastic Packaged Power Amplifier February 2007 - Rev 27-Feb-07 CMQ1631-QH Power (dB) Typical Performance CMQ1631-QH Psat 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 P sat 6V P sat 7V P sat 8V P sat 7V, Iq = 400mA 11 11.5 12 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 17.5 18 Freq (GHz) Power (dB) CMQ1631-QH P1dB 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 P1dB 6V P1dB 7V P1dB 8V P1dB 7V, Iq = 400mA 11 11.5 12 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 17.5 18 Freq (Ghz) CMQ1631-QH S21 30 28 26 24 Gain (dB) 22 20 18 16 14 12 S21 6V S21 7V S21 8V 10 8 6 4 2 0 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 17.5 18 18.5 19 19.5 20 Freq (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 2 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 13 - 18 GHz 0.5W QFN Plastic Packaged Power Amplifier February 2007 - Rev 27-Feb-07 CMQ1631-QH Typical Performance CMQ1631-QH S11 10 8 6 4 S11 (dB) 2 S1 1 6V 0 S1 1 7V -2 S1 1 8V -4 -6 -8 -10 -12 -14 -16 -18 -20 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 17.5 18 18.5 19 19.5 20 Freq (GHz) CMQ1631-QH S22 10 8 6 S22 (dB) 4 2 S 22 6V 0 S 22 7V -2 S 22 8V -4 -6 -8 -10 -12 -14 -16 -18 -20 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 17.5 18 18.5 19 19.5 20 18 18.5 19 19.5 20 Freq (GHz) CMQ1631-QH S12 40 30 S12 (dB) 20 S 12_6V 10 S 12_7V S 12_8V 0 -10 -20 -30 -40 10 10.5 11 11.5 12 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 17.5 Freq (GHz) Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 3 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 13 - 18 GHz 0.5W QFN Plastic Packaged Power Amplifier February 2007 - Rev 27-Feb-07 CMQ1631-QH Physical Dimensions Ordering Information Part Number for Ordering Description CMQ1631-QH-0G00 CMQ1631-QH-0G0T PB-CMQ1631-QH-0000 Matte Tin plated RoHS compliant QFN4X4 24L surface mount package in bulk quantity Matte Tin plated RoHS compliant QFN4X4 24L Surface mount package in tape and reel CMQ1631-QH Evaluation Board We also offer this part with SnPb (Tin-Lead) or NiPdAu plating. Please contact your regional sales manager for more information regarding different plating types. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 4 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws. 13 - 18 GHz 0.5W QFN Plastic Packaged Power Amplifier February 2007 - Rev 27-Feb-07 CMQ1631-QH Handling and Assembly Information CAUTION! - Mimix Broadband MMIC Products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Do not ingest. Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Life Support Policy - Mimix Broadband's products are not authorized for use as critical components in life support devices or systems without the express written approval of the President and General Counsel of Mimix Broadband. As used herein: (1) Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. (2) A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Package Attachment - This packaged product from Mimix Broadband is provided as a rugged surface mount package compatible with high volume solder installation. Care should be taken not to apply heavy pressure to the top or base material to avoid package damage. Vacuum tools or other suitable pick and place equipment may be used to pick and place this part. Care should be taken to ensure that there are no voids or gaps in the solder connection so that good RF, DC and ground connections are maintained. Voids or gaps can eventually lead not only to RF performance degradation, but reduced reliability and life of the product due to thermal stress. Mimix Lead-Free RoHS Compliant Program - Mimix has an active program in place to meet customer and governmental requirements for eliminating lead (Pb) and other environmentally hazardous materials from our products. All Mimix RoHS compliant components are form, fit and functional replacements for their non-RoHS equivalents. Lead plating of our RoHS compliant parts is 100% matte tin (Sn) over copper alloy and is backwards compatible with current standard SnPb low-temperature reflow processes as well as higher temperature (260°C reflow) “Pb Free” processes. Part Numbering Designator - For Mimix/Celeritek lead-free products, the letter “G” will be used in the part number for Matte Tin finished RoHSCompliant components and “L” will be used in the part number of NiPdAu finished RoHS Compliant components in the second position of the part number suffix, as shown below: Example A: CXX1234-XX-0G00 = component bulk quantity Matte Tin finished RoHScompliant parts Example B: CXX1234-XX-0L0T = component in tape and reel NiPdAu finished RoHS parts For those customers not making the change at this time, Mimix/Celeritek will maintain production of current configurations. For questions and comments e-mail: [email protected]. Mimix Broadband, Inc., 10795 Rockley Rd., Houston, Texas 77099 Tel: 281.988.4600 Fax: 281.988.4615 mimixbroadband.com Page 5 of 5 Characteristic Data and Specifications are subject to change without notice. ©2007 Mimix Broadband, Inc. Export of this item may require appropriate export licensing from the U.S. Government. In purchasing these parts, U.S. Domestic customers accept their obligation to be compliant with U.S. Export Laws.