MITSUMI Camera Module Connectors CAM-G95 Series Connectors FEATURES 1. This is a camera module connector used for cell phones, PDA, back monitors for car, toy cameras, security cameras etc. 2. Space-saving design adopting connectors that minimize increase in size. 3. Providing highly reliable contacts that adopt side contacts. CAM-F91 Series MODEL CAM-G95 CAM-G95A CAM-G95C Running No. assigned by us No. of contacts Supporting module size Remarks R41-7001A 24 10 10 Half-lock Type R41-9128A 24 10 10 Wihtout lock R41-7003A 24 8.5 8.5 Wihtout lock R41-8449A 20 6 6 [L type] lead R41-4603A 20 6 6 [Straight type] lead SPECIFICATIONS ELECTRICAL CHARACTERISTICS 50V AC (rms) 0.5A 200V AC 50MΩ min. 40mΩ max. Rated Voltage Rated Current Withstanding Voltage Insulation Resistance Contact Resistance MATERIAL & FINISH Component Parts Housing Contact Shell Material 9T Nylon Copper Alloy Copper Alloy Finish Black Gold flash plating Tin reflow plating MITSUMI Camera Module Connectors DIMENSIONS CAM-G95 R41-9128A 12 5 (Lead pitch) 10.1 3 (Lead pitch) 1 6 1 (Lead pitch) 1 1.4 ±0.05 4.5 ±0.05 6 12 10.1 1 1 2 3 A 0. 6 A C0.75 1.65 3.45 10.8 ±0.05 11.3 ±0.05 12.6 ±0.05 0.27 A-A 1 ±0.05 0.7 ±0.05 4.5 ±0.05 (0.33) Corner mark Recommended PWB layout (Reference) CAM-G95A R41-7003A 5 (Lead pitch) 3 (Lead pitch) 5 3 1 (Lead pitch) 1 3.15 ±0.05 4.15 ±0.05 5 ±0.05 3 ±0.05 1 ±0.05 1 8.6 10.5 2 9.3 ±0.05 9.8 ±0.05 11.1 ±0.05 3 C0.7 0.3 +0.1 -0.03 8.6 10.5 3.45 1 ±0.05 0.7 ±0.05 1 ±0.05 Pin No.1 Recommended PWB layout CAM-G95C R41-8449A 2 3 Pin No.1 mark silk print Note 1 2 3.6 6.1+0.1 0 8 2.77 ±0.05 1 Note 1 2.69 ±0.05 3.6 ±0.05 2 ±0.05 0.9 ±0.05 0.9 ±0.05 2 ±0.05 3.6 ±0.05 Note 1 2 3.6 6.1+0.1 0 8 0.9 Note 2 0.9 0.3 ±0.05 Note 1 0.3 3 0.49 ±0.05 0.5 ±0.05 6.8 ±0.05 7.3 ±0.05 8.6 ±0.05 Note 1. Coplanarity: Max. 0.1 2. Wihtout lock Recommended PWB layout (Reference) Unit : mm