MOSPEC GBJ20A THRU GBJ20M GLASS PASSIVATED BRIDGE SINGLE-PHASE BRIDGE RECTIFIERS VOLTAGE 50 to 1000 Volts CURRENT 20 Amperes FEATURES * Plastic package has Underwriters Laboratory Flammability Classification 94V-0 * High case dielectric strength of 2500 VRMS * Ideal for printed circuit boards * Glass passivated chip junction * High surge current capability * High temperature soldering guaranteed: 260 oC/10 seconds, 0.375 (9.5mm) lead length, 5lbs. (2.3Kg) tension MECHANICAL DATA * Case: Molded plastic body * Terminal: Plated leads solderable per MIL-STD-750, Method 2026 * Mounting Position: Any (Note 3) * Mounting Torque: 8 in-lbs max. Weight: 0.26 oz., 7.0g MAXIMUM RATINGS AND ELECTRICAL CHARATERISTICS * Rating at 25℃ ambient temperature unless otherwise specified * Single phase,half wave. 60Hz, resistive or inductive load. * For capacitive load derate current by 20 % Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Symbo GBJ20A GBJ20B GBJ20D GBJ20G GBJ20J GBJ20K GBJ20M l VRRM 50 100 200 400 600 800 1000 VRWM VR RMS Reverse Voltage VR(RMS) Characteristic 35 70 140 280 420 560 Unit V 700 V (1) IF(AV) 20 3.5(2) A IFSM 240 A VFM 1.05 V Peak Reverse Current ( Rated DC Voltage, TC = 25℃) ( Rated DC Voltage, TC = 125℃) IR 10 250 uA I2 t Rating for Fusing( t<8.3 ms) I2t 240 A2s Cj 140 pF Average Rectifier Forward Current @ TC=87℃ @ TA=25℃ Non-Repetitive Peak Surge Current 8.3 ms Single half sine-wave superimposed on rated load (JEDEC Method) Forward Voltage (per element) ( IF =10 Amp) Typical Junction Capacitance per element Maximum Thermal Resistance per leg Operating and Storage Temperature Range (2) Rθ jA Rθ jc 22 1.5(1) TJ , Tstg -55 to +150 o C/W ℃ Note: NOTES: 1. Unit case mounted on Al plate heatsink 2. Unit mounted on P.C.B. without heatsink 3. Recommended mounting position is to bolt down on heatsink with silicone thermal compound for maximum heat transfer with #6 screw GBJ20A thru GBJ20M P.C.B. Board O Tj=25 C Pulse with =300 us CASE TEMPERATURE (℃) FORWARD VOLTAGE (Volts) FIG-3 PEAK FORWARD SURGE CURRENT FIG-4 TYPICAL JUNCTION CAPACITANCE Single Half-Sine Wave (JEDEC Method) O Tj=25 C O Tj=25 C F=1.0MHz JUNCTION CAPACITANCE (PF) PEAK FORWARD SURGE FIG-2 TYPICAL FORWARD CHARACTERISITICS NSTANTANEOUS FORWARD CURRENT (Amp.) Heatsink Mounting, TC CURRENT (Amp.) AVERAGE FORWARD RECTIFIED CURRENT (Amp.) FIG-1 FORWARD CURRENT DERATING CURVE REVERSE VOLTAGE (Volts) FIG-5 TYPICAL REVERSE CHARACTERISTICS Per leg FIG-6 TYPICAL TRANSIENT THERMAL IMPEDANCE INSTANTANEOUS CURRENT (uA) O Tj=125 C O Tj=25 C PERCENT RATED PEAK REVERSE VOLTAGE (%) TRANSIENT THERMAL IMPEDANCE (OC/W) NUMBER OF CYCLES AT 60 Hz T, HEATING TIME (sec)