NEL SC-D142C-FREQ

CRYSTAL CLOCK OSCILLATORS
LVCMOS
Data Sheet 0335A
Rev. D
SC-D1420 Series
Description
The SC-D1420 Series of quartz crystal oscillators provide enable/disable 3-state LVCMOS compatible
signals for bus connected systems. Supplying Pin 1 of the SC-D1420 units with a logic “1" or open enables
its Pin 3 output. In the disable mode, Pin 3 presents a high impedance to the load.
Features
• Wide frequency range–1.0MHz to 40.0MHz
• User specified tolerance available
• Will withstand vapor phase temperatures of 253°C
for 4 minutes maximum
• Space-saving alternative to discrete component
oscillators
• 1.2 Volt operation
• High shock resistance, to 1000g
• Power supply decoupling internal
• High Reliability - NEL HALT/HASS qualified for
crystal oscillator start-up conditions
• Low Jitter - Wavecrest jitter characterization
available
• No internal PLL avoids cascading PLL problems
• Metal lid electrically connected to ground to
reduce EMI
• Gold plated pads
• RoHS Compliant, Lead Free Construction
Electrical Connection
Pin
Connection
1
2
3
4
Enable/Disable
Ground
Output
VDD
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: [email protected] www.nelfc.com
Data Sheet 0335A
CRYSTAL CLOCK OSCILLATORS
SC-D1420 Series
LVCMOS
Rev. D
Continued
Operating Conditions and Output Characteristics
Electrical Characteristics
Parameter
Frequency
Duty Cycle
Logic 0
Logic 1
Rise & Fall Time
Jitter, RMS(2)
Tpz
Enable Voltage
Disable Voltage
Frequency Stability (1)
Symbol
Conditions
------------@ VDD/2
VOL
@ 600µA
@ 600µA
VOH
tr,tf
10-90%VO
--------------------------------dF/F
Overall conditions including:
voltage, calibration, temp..
10 year aging, shock, vibration
Min
1.0MHz
45/55%
----VDD-0.2V
------------2.0V
-----100ppm
Typical
--------------------3 psec
-----------------
Max
40.0MHz
55/45%
0.2V
----10.0 ns
----25 ns
----0.8V
+100ppm
Min
1.14V
0.0 mA
0.0 mA
0°C
-55°C
---------------------
Typical
1.2V
-------------------------------------
Max
1.26V
2.0 mA
±600µA
70°C
125°C
2.52 mW
300°C
6 pf
10 ms
2 ms
General Characteristics
Parameter
Supply Voltage(3)
Supply Current
Output current
Operating temperature
Storage temperature
Power Dissipation
Lead temperature
Load
Start-up Time
Symbol
VDD
IDD
IO
TA
TS
PD
TL
----ts
Conditions
----No Load
Low level Output Current
-------------Soldering, 10 sec.
----20MHz or greater
Less than 20MHz
Environmental and Mechanical Characteristics
Mechanical Shock
Thermal Shock
Vibration
Soldering Condition
Hermetic Seal
Per MIL-STD-202, Method 213, Condition E
Per MIL-STD-833, Method 1011, Condition A
0.060" double amplitude 10 Hz to 55 Hz, 35g’s 55Hz to 2000 Hz
300°C for 10 seconds
Leak rate less than 1 x 10-8 atm.cc/sec
Footnotes:
1) Standard frequency stability (±20,±25,±50ppm & others available)
2) Jitter performance is frequency dependent. Please contact factory for full Wavecrest characterization.
RMS jitter bandwidth of 12kHz to 20MHz.
3) Internal high frequency power source decoupling.
Creating a Part Number
SC -D142X - FREQ
Package Code
SC 4 pad 5x7mm SMD
Input Voltage
Code Specification
D
1.2V
Tolerance/Performance
0 ±100ppm 0-70°C
1 ±50ppm 0-70°C
7 ±25ppm 0-70°C
9 Customer Specific
A ±20ppm 0-70°C
B ±50ppm -40 to +85°C
C ±100ppm -40 to +85°C
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email: [email protected] www.nelfc.com