Non-Polar Aluminum Electrolytic Capacitors NNR Series RADIAL LEADS NON-POLARIZED ALUMINUM ELECTROLYTIC CAPACITORS FEATURES RoHS Compliant • DESIGNED FOR APPLICATIONS WITH REVERSIBLE POLARITY • LOW AC VOLTAGE CAN BE SUPERIMPOSED WITHIN THE LIMITED ARIPPLE RIPPLE CURRENT includes all homogeneous materials CHARACTERISTICS Rated Voltage Range Capacitance Range Operating Temperature Range Capacitance Tolerance Max. Leakage Current After 5 minutes At +20°C *See Part Number System for Details 10 ~ 100Vdc 0.47 ~ 1,000µF -40 ~ +85°C ±10% (K), ±20%(M) 0.03CV +8µA Surge Voltage & Max. Tan δ @ 120Hz/+20°C Low Temperature Stability (Impedance Ratio @ 120Hz) Load Life Test at Rated W.V. & +85°C 2,000 Hours (Polarity Shall Be Reversed Every 250 Hours W.V. (Vdc) S.V. (Vdc) Tan δ Z-25°C/Z+20°C Z-40°C/Z+20°C Capacitance Change Tan δ Leakage Current 10 13 0.20 3 8 MAXIMUM ESR (Ω AT 120HZ AND 20oC) MAXIMUM PERMISSIBLE RIPPLE CURRENT (mA rms AT 120HZ AND 85oC) Cap. (µF) 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 10 38 58 70 125 225 295 390 620 Working Voltage (Vdc) 16 25 35 50 5.0 10 20 28 25 30 38 28 40 45 50 50 60 75 90 60 80 90 110 85 90 125 135 165 180 200 250 260 320 350 410 360 425 440 420 540 585 740 - Cap. (µF) 100 8.0 15 25 30 46 70 120 170 200 - 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 STANDARD PRODUCTS AND CASE SIZE TABLE D φ x L (mm) Cap. (µF) 0.47 1.0 2.2 3.3 4.7 10 22 33 47 100 220 330 470 1000 10 5x11 5x11 5x11 6.3x11 8x12.5 10x12.5 10x16 12.5x20 Working Voltage (Vdc) 16 25 35 50 5x11 5x11 5x11 5x11 5x11 5x11 5x11 5x11 5x11 5x11 6.3x11 5x11 5x11 6.3x11 8x11.5 5x11 6.3x11 6.3x11 8x11.5 6.3x11 6.3x11 8x11.5 10x12.5 8x11.5 8x12.5 10x12.5 10x20 10x12.5 10x16 10x20 12.5x25 10x16 10x20 12.5x25 10x20 12.5x20 12.5x25 12.5x25 - 16 25 35 50 100 20 32 44 63 125 0.18 0.14 0.13 0.09 0.10 2 2 2 2 2 6 4 3 3 3 Within ±25% of initial measured value Less than 200% of specified maximum value Less than specified maximum value 100 5x11 5x11 5x11 6.3x11 6.3x11 8x12.5 10x16 10x20 12.5x25 - 10 15.08 10.05 7.06 3.32 1.51 1.01 0.71 0.33 Working Voltage (Vdc) 16 25 35 50 458.79 215.63 98.01 65.34 56.47 49.41 45.88 29.86 26.54 23.22 21.56 13.57 12.06 10.56 9.80 9.05 8.04 7.04 6.53 6.35 5.65 4.94 4.59 2.99 2.65 2.32 2.16 1.36 1.21 1.06 0.98 0.90 0.80 0.70 0.64 0.56 0.49 0.30 - 100 317.62 149.28 67.86 45.24 31.76 14.93 6.79 4.52 3.18 - PART NUMBERING SYSTEM NNR 101 M 25V 8X11 F RoHS Compliant Case Size (D (Dφ x L) Working Voltage (Vdc) Tolerance Code (M=20%) Cap. Code: First 2 characters significant Third character is multiplier Series LEAD SPACING AND DIAMETER (mm) Case Dia. (Dφ) Lead Dia. (dφ) Lead Space (F) Dim. α Dim. β 5 0.5 2.0 0.5 1.5 6.3 0.5 2.5 0.5 1.5 Insulation Sleeve 8 0.6 3.5 0.5 1.5 10 12.5 0.6 0.6 5.0 5.0 0.5 0.5 1.5 1.5 dφ ± 0.05 PRECAUTIONS ® Please review the notes on correct use, safety and precautions found on pages T10 & T11 of NIC’s Electrolytic Capacitor catalog. Also found at www.niccomp.com/precautions If in doubt or uncertainty, please review your specific application - process details with NIC’s technical support personnel: [email protected] NIC COMPONENTS CORP. www.niccomp.com F ± 0.5 L + β max. www.lowESR.com 15mm Min. 4mm Min. www.RFpassives.com Dφ ± α www.SMTmagnetics.com 87