MOTOR START AC ELECTROLYTIC MSC SERIES The MSC Series is a range of AC electrolytic capacitors. These capacitors are most often used to provide the torque necessary to start AC motors and in other intermittent AC applications. FEATURES: D • Two .25” Quick Connect terminals • Round moisture and oil resistant plastic case • 110VAC to 330VAC • Quick disconnect terminals C • Recessed terminals • Long life and high reliability RATINGS Capacitance Range: H 110/125 Volts – 21µF to 1200µF 220/250 Volts – 21µF to 324µF 330 Volts – 21µF to 259µF PERFORMANCE SPECIFICATIONS Operating Temperature Range: –40°C to +65°C Power Factor: 10% Max.; 12% ≤30µF Operating Frequency: 47 – 60HZ MOUNTING Vertical mounting of the capacitor with the terminals up is recommended. However, horizontal mounting is acceptable providing the vent is located in the up position. Vertical mounting with the terminals down is not recommended because the capacitor life may be reduced and the operation of the pressure relief vent impaired. CLEANING Solvent residues on the capacitors after cleaning may penetrate the seal and cause internal corrosion resulting in shortened life. Alcohol or water detergent cleaning is not usually harmful but halogenated cleaning solvents are not recommended and should be avoided. SAFETY Because the watt–second value of these capacitors is high, precautions should be taken during the testing of these devices. Discharge resistors should be specified when there is a possibility of a residual charge left on the capacitor or to protect contacts. Mis–application, such as exceeding design limits or applying continuous AC voltage, may result in destruction or explosion of capacitors. ORDERING INFORMATION MSC 125V 21 Series Voltage Capacitance NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com 25 MOTOR START AC ELECTROLYTIC MSC SERIES 110/125VAC Ratings and Dimensions NTE Type Number Capacitance Case Dimensions – Inch (mm) Case Style mF D H C MSC125V21 21–25 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E MSC125V25 25–30 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E MSC125V30 MSC125V36 30–36 36–43 1.438 (36.53) 1.438 (36.53) 2.75 (69.85) 2.75 (69.85) 0.50 (12.70) 0.50 (12.70) E E MSC125V43 43–52 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E MSC125V53 53–64 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E MSC125V72 72–86 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E MSC125V88 MSC125V108 88–106 108–130 1.438 (36.53) 1.438 (36.53) 2.75 (69.85) 2.75 (69.85) 0.50 (12.70) 0.50 (12.70) E E MSC125V124 124–149 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E MSC125V145 145–174 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E MSC125V161 MSC125V189 161–193 189–227 1.438 (36.53) 1.438 (36.53) 2.75 (69.85) 2.75 (69.85) 0.50 (12.70) 0.50 (12.70) E E MSC125V216 216–259 1.438 (36.53) 3.38 (85.85) 0.50 (12.70) F MSC125V233 233–280 1.438 (36.53) 3.38 (85.85) 0.50 (12.70) F MSC125V270 270–324 1.438 (36.53) 3.38 (85.85) 0.50 (12.70) F MSC125V324 MSC125V340 324–389 340–408 1.438 (36.53) 1.810 (45.97) 4.38 (111.25) 3.38 (85.85) 0.50 (12.70) 0.63 (16.00) G H MSC125V378 378–454 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H MSC125V400 400–480 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H MSC125V460 460–552 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H MSC125V540 MSC125V590 540–648 590–708 1.810 (45.97) 1.810 (45.97) 3.38 (85.85) 4.38 (111.25) 0.63 (16.00) 0.63 (16.00) H J MSC125V829 829–995 1.810 (45.97) 4.38 (111.25) 0.63 (16.00) J MSC125V1000 1000–1200 2.060 (52.32) 4.38 (111.25) 0.88 (22.35) K 220/250VAC Ratings and Dimensions NTE Type Number 26 Capacitance Case Dimensions – Inch (mm) Case Style mF D H C MSC250V21 21–25 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E MSC250V25 25–30 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E MSC250V30 MSC250V36 30–36 36–43 1.438 (36.53) 1.438 (36.53) 2.75 (69.85) 2.75 (69.85) 0.50 (12.70) 0.50 (12.70) E E MSC250V43 43–52 1.810 (45.97) 3.38 (85.85) 0.50 (12.70) F MSC250V53 53–64 1.810 (45.97) 3.38 (85.85) 0.50 (12.70) F MSC250V72 72–86 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H MSC250V88 MSC250V108 88–106 108–130 1.810 (45.97) 1.810 (45.97) 3.38 (85.85) 3.38 (85.85) 0.63 (16.00) 0.63 (16.00) H H MSC250V124 124–149 1.810 (45.97) 4.38 (111.25) 0.63 (16.00) J MSC250V130 130–156 1.810 (45.97) 4.38 (111.25) 0.63 (16.00) J MSC250V145 145–174 1.810 (45.97) 4.38 (111.25) 0.63 (16.00) J MSC250V161 MSC250V189 161–193 189–227 2.060 (52.32) 2.060 (52.32) 4.38 (111.25) 4.38 (111.25) 0.88 (22.35) 0.88 (22.35) K K MSC250V216 216–259 2.060 (52.32) 4.38 (111.25) 0.88 (22.35) K MSC250V233 233–280 2.060 (52.32) 4.38 (111.25) 0.88 (22.35) K MSC250V270 270–324 2.060 (52.32) 4.38 (111.25) 0.88 (22.35) K NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com MOTOR START AC ELECTROLYTIC MSC SERIES 330VAC Ratings and Dimensions NTE Type Number Capacitance Case Dimensions – Inch (mm) Case Style mF D H C MSC330V21 21–25 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) E MSC330V25 25–30 1.438 (36.53) 2.75 (69.85) 0.50 (12.70) F MSC330V30 MSC330V36 30–36 36–43 1.438 (36.53) 1.438 (36.53) 2.75 (69.85) 2.75 (69.85) 0.50 (12.70) 0.50 (12.70) F F MSC330V43 43–52 1.438 (36.53) 3.38 (85.85) 0.50 (12.70) F MSC330V53 53–64 1.810 (45.97) 3.38 (85.85) 0.63 (16.00) H MSC330V72 72–86 1.810 (45.97) 4.38 (111.25) 0.63 (16.00) J MSC330V88 MSC330V108 88–106 108–130 1.810 (45.97) 2.060 (52.32) 4.38 (111.25) 4.38 (111.25) 0.63 (16.00) 0.88 (22.35) J K MSC330V124 124–149 2.560 (65.02) 4.38 (111.25) 0.88 (22.35) K MSC330V145 145–174 2.060 (52.32) 4.38 (111.25) 0.88 (22.35) K MSC330V161 MSC330V189 161–193 189–227 2.560 (65.02) 2.560 (65.02) 4.38 (111.25) 4.38 (111.25) 0.88 (22.35) 0.88 (22.35) L L MSC330V216 216–259 2.560 (65.02) 4.38 (111.25) 0.88 (22.35) L NTE Electronics, Inc. D Voice (800) 631–1250 (973) 748–5089 D FAX (973) 748–6224 D http://www.nteinc.com 27