NTE30112 LED − Dual Color 5mm High Efficiency Red/Yellow Green Features: D RoHS Compliant D White Diffused Absolute Maximum Ratings: (TA = +25°C unless otherwise specified) Power Dissipation, Pd High Efficiency Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90mW Yellow Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84mW Continuous Forward Current, IF High Efficiency Red . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA Yellow Green . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25mW Peak Forward Current (1/10 Duty Ratio, 0.1ms Pulse Width), IFM . . . . . . . . . . . . . . . . . . . . . . . 50mA Reverse Voltage, VR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5V LED Junction Temperature, Tj . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . +100°C Operating Temperature Range, Topr . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −25°C to +80°C Storage Temperature Range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40°C to +100°C DIP Soldering Temperature (During Soldering, 3mm from body, 5sec max), TL . . . . . . . . . . +260°C Electro−Optical Characteristics: (TA = +25°C unless otherwise specified) Parameter View Angle of Half Power Forward Voltage High Efficiency Red Yellow Green Luminous Intensity (Note 1) High Efficiency Red Yellow Green Peak Emission Wavelength High Efficiency Red Yellow Green Dominate Wave Length (Note 2) High Efficiency Red Yellow Green Symbol Test Conditions Min Typ Max Unit 2Q 1/2 IF = 20mA − 45 − deg VF IF = 20mA − − 2.05 2.15 2.80 2.80 V V IV IF = 20mA 25 30 45 50 − − mcd mcd λp p IF = 20mA − − 625 570 − − nm nm λd(HUE) ( ) IF = 20mA − − 618 567 − − nm nm Note 1. Luminous intensity is measured with an Exeltron 2001, Tolerance = 30%. Note 2. The dominate wavelength, λd, is derived from the CIE Chromaticity Diagram and represents the color of the device. .224 (5.7) Dia .197 (5.0) Dia .343 (8.7) 0.02 (0.7)Max 1 2 0.01 (0.5) 1.00 (25.4) Min 0.03 (1.0) Min .100 (2.54) Min 1. Red − 2. Green −