NTE3076 0.560 Inch, Seven Segment, w 1 Digit /Overflow and +, Common Anode, RHDP Features: D High Performance GaAsP D Large, easy to read digits D Fast switching − excellent for multiplexing D Low power consumption D Solid state reliability − long operation life D Rugged plastic construction D Directly compatible with integrated circuits D High brightness with high contrast D Low forward voltage D Wide viewing angle 150° Applications: D Digital readout displays D Instrument panels D Point of sale equipment D Digital clocks D Tv and radios Absolute Raximum Ratings: Power Dissipation at +25°C ambient . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 840mW Derate linearly from +25°C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −12.0mW/°C Continuous Forward Current Total . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 420mA Per Segment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA Decimial Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30mA Reverse Voltage Per Segment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V Decimal Point . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6V Solsdering Time at 260°C (Note 1,2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 sec. Operating Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40° to +85°C Storage Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . −40° to +85°C Thermal Resistance Junction to Free Air, ΦJA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160°C/W Note 1. Leads of the device immersed to 1/16 inch from the body. Maximum device surface temperature is 140°C. Note 2. For flux removal, Freon TF, Freon TE, Isoproponal or water may be used up to their boiling points. Operating Characteristics: (TA = +25°C unless otherwise specified) Parameter Test Conditions Min Typ Max Unit 125 420 − μcd Peak Emission Wavelength − 650 − nm Spectral Line Half Width − 20 − nm − − 2.0 V − − 2.0 V − 2 − Ω − 2 − Ω − 35 80 pF − 35 80 pF − − 100 μA − − 100 μA − − 100 μA Luminous Intensity, Digit Average IF = 10mA (Note 3,4) Forward Voltage Segment IF = 20mA Decimal Point Dynamic Resistance Segment Ippk = 100mA Decimal Point Capacitance Segment V=0 Decimal Point Reverse Current Segment VR = 5.0V 5 0V Decimal Point Segment C or D of “+” Note 3. The digit average Luminous Intensity is obtained by summing the Luminous Intensity of each segment and dividing by the total number of segments. Intensity will not vary mopre than ±33% between all segments within a digit. Note 4. The decimal point is designed to have the same surface brightness as the segments, therefore, the Luminous Intensity of the decimal point is .3 times the Luminous Intensity of the segments, since the area of the decimal point is .3 times the area of the average points. Pin Connection Diagram Cathode C (1) 1 18 N.C. Cathode D (1) 2 17 N.C. Cathode B (1) 3 16 N.C. Cathode D.P. (1) 4 15 Cathode A (1) Cathode E (2) 5 14 Common Anode (1) Cathode D (2) 6 13 Common Anode (2) Cathode G (2) 7 12 Cathode F (2) Cathode C (2) 8 11 Cathode A (2) Cathode D.P. (2) 9 10 Cathode B (2) .985 (25.0) .500 (12.7) .750 (19.05) A .560 (14.22) A G B B D C D C D.P. 8° D.P. .066 (1.67) Dia Digit #1 .315 (8.0) Pin 1 .020 (.508) Typ .100 (2.54) Typ .060 (1.52) .155 (3.94) .010 (.254) .600 (15.24)