G1214A Global Mixed-mode Technology Inc. Rail-to-Rail I/O, High-Slew-Rate OP Amp Features General Description G1214A is a input/output rail-to-rail Operational Amplifier. It can be operated from +2.2V to +7V single supply or from ±1.1V to ±3.5 dual supply. G1214A can drive 66mA into resistor loads to within 10% power rail. AC performance is very excellent with 6.5MHz bandwidth, 6.5V/µs Slew Rate, 95dB open loop gain, 60 degree phase margin and low distortion. +2.2V to +7V Single-Supply Operation Input / Output Rail-to-Rail Low Input Current High Output Driving Capacity Low Quiescent Current: 500µA @ 5V High Slew Rate 6.5V/µs High Gain-Bandwidth Product 6.5MHz High Open Loop Gain 95dB High PSRR 70dB Supply current of G1214A is only 500µA per Amplifier. It is very suitable for low current consumption applications to control high current loads. Applications include audio amplification for computers, sound ports, sound cards and set-top boxes. Applications Headphone Driver Portable Equipment Battery-Powered Equipment Multimedia Audio ASIC Input or Output Amplifier Sensor Amplifier Low Power/Low Voltage Applications Set-up Box Audio HP or Pre-driver Applications G1214A is housed in a small SOT-23-5 package. Ordering Information ORDER NUMBER MARKING TEMP. RANGE PACKAGE (Green) G1214AT11U 124Ax -40°C to 85°C SOT-23-5 Note:T1: SOT-23-5 1: Bonding Code U: Tape & Reel Pin Configuration Typical Application Circuit VDD G1214A IN OUT 1 5 VDD + OUT G1214A VSS 2 RL 2k + IN+ 3 4 IN- SOT-23-5 Rail-to-Rail is a registered trademark of Nippon Motorola, Ltd. TEL: 886-3-5788833 http://www.gmt.com.tw Ver: 1.0 Feb 11, 2010 1