Tactile Switches 2.8x3.8mm Side/Vertical Push Tactile Switch TP816 Series 6 2 4 3 5 3 5 2 4 6 TP816S 6 2 4 3 5 3 5 2 4 6 TP816V General Specifications: 6 2 4 6 How to order 1 2 3 4 TP816 2 L H 3 A B 4 S G 5 CIRCUIT P.C.B LAYOUT 1 4 3 5 3 S V1 V2 2 HEIGTH FOR ACTUATOR Side Push Vertical Push H: 1.9mm Vertical Push H: 2.5mm OPERATING FORCE: 160gf (Only for Vertical Push) 200gf (Only for Side Push) COLOR OF ACTUATOR Black White CONTACT MATERIAL: Silver Gold 5 MATERIALS » Cover: Stainless steel with silver plating » Spacing Cover: Stainless steel » Stem: LCP High-temp thermoplastic Color: Black » Tape: Teflon » Contact: Stainless steel with silver plating » Base: LCP High-temp thermoplastic Color: Black » Terminal: Brass, with silver plating Brass, gold plated MECHANICALS » Operation Force: 160± 50gf Vertical Push 220+80/-70gf Side Push » Stroke: 0.25+0.2/-0.1 mm » Operation Temperature: -30°C~80°C » Storage Temperatute: -40°C~85°C ELECTRICAL » Electrical Life: 100,000 cycles » Rating: 50mA, 12VDC » Contact Resistance: 100MΩ max. » Insulation Resistance: 100MΩ min. at 100VDC » Dielectric Strength: 100VAC/1 minute SOLDERING PROCESS » Hand Soldering: Use a soldering iron of 30 watts, controlled st 350°C approximately while applying. » Reflow Soldering: When applying reflow soldering, the peak temperature or the reflow oven should be set to 260°C max Reflow Temperature Profile: MAX 260° 255° 230° 150° 5 TR PACKAGE: Tape & Reel [email protected] Room Temperature 120~150sec 5~10sec 60sec TIME(sec) www.greatecs.com 1