D B 1 0 1 S (D F 0 0 5 S ) T H R U D B 1 0 7 S (D F 1 0 S ) 星合电子 SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ Reverse Voltage: 50 to 1000 Volts Forward Current: 1.0 Amps DBS FEATURES Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated chip junction Rating to 1000V PRV Ideal for printed circuit board High temperature soldering guaranteed:260 C/10 seconds at terminals 0.031(0.8) 0.024(0.6) 0.256(6.5) 0.244(6.2) 0.047(1.2) 0.037(0.95) 0.323(8.2) 0.315(8.0) MECHANICAL DATA 0.335(8.5) 0.307(7.8) 0.102(2.6) 0.089(2.2) Case: DBS molded plastic body Epoxy: UL94V-0 rate flame retardant 0.063(1.6) 0.055(1.4) 0.406(10.3) 0.394(10.0) Terminals: Plated leads solderable per MIL-STD-750,method 2026 0.205(5.2) 0.197(5.0) Mounting Position: Any Weight: 0.02ounce, 0.38 gram Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (Rating at 25 C ambient temperature unless otherwise specified. Single phase ,half wave ,60HZ,resistive or inductive load. For capacitive load,derate current by 20%.) Symbols DB101S DB102S DB103S DB104S DB105S DB106S DB107S DF005S DF01S DF02S DF04S DF06S DF08S DF10S 50 100 200 400 600 800 1000 35 70 140 280 420 560 700 50 100 200 400 600 800 1000 Units Maximum DC Blocking Voltage VRRM VRMS VDC Maximum Average Forward Rectified Current I(AV) 1.0 Amp Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 50 Amps VF 1.1 Volts Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum Instantaneous Forward Voltage at 1.0 A DC Maximum DC Reverse Current at rated DC blocking voltage TA=25 C 10 IR A TA=125 C 500 Typical junction capacitance(Note1) CJ Typical thermal resistence(Note 2) R Operating junction and storage temperature range Volts Volts Volts JA TJ TSTG 25 PF 40 K/W -55 to +150 C Note: 1.Measured at 1MHZ and applied reverse voltage of 4.0 Volts. 2. Thermal resistance junction to ambient mounted on P.C.B. With 05*0.5 inches(1.3*1.3mm) copper pads 1 ＧＡＯＭＩ ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳＣＯ．，ＬＴＤ． ＷＷＷ．ＳＤＤＺＧ．ＣＯＭ ＴＥＬ：０５３６－２２１０３５９ ＱＱ：４６４７６８０１７ D B 1 0 1 S (D F 0 0 5 S ) T H R U D B 1 0 7 S (D F 1 0 S ) 星合电子 SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳ Reverse Voltage: 50 to 1000 Volts Forward Current: 1.0 Amps FIG.2-MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1.0 60 0.8 PEAK FORWARD SURGE CURRENT(AMPERES) AVERAGE FORWARD CURRENT (A) FIG.1-TYPRCAL FORWARD CURRENT DERATING CURVE 0.6 0.4 SINGLE PHASE HALF WAVE 60HZ RESISTIVE OR INDUCTIVE LOAD 0.375"(9.5mm)LEAD LENGTH 0.2 0 0 25 50 75 100 125 150 TA=25 C 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 50 40 30 20 10 175 0 AMBIENT TEMPERATURE ( C) 1 5 10 50 100 NUMBER OF CYCLES AT 60Hz FIG4-TYPICAL FORWARD CHARACTERISTICS FIG3-TYPICAL JUNCTION CAPACITANCE INSTANTANEOUS FORWARD CURRENT( AMPERES) JUNCTION CAPACITANCE(pF) 100 10 0 1 4 100 10 REVERSE VOLTAGE. (V) 10 1 0.1 TA=25 C Pulse Width=300 s 1% Duty Cycle 0.01 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 INSTANTANEOUS FORWARD VOLTAGE (VOLTS) FIG.5-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT ( uA) 100 Tj=125 C 10 1 Tj=25 C 0.1 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE(%) 2 ＧＡＯＭＩ ＸＩＮＧＨＥ ＥＬＥＣＴＲＯＮＩＣＳＣＯ．，ＬＴＤ． ＷＷＷ．ＳＤＤＺＧ．ＣＯＭ ＴＥＬ：０５３６－２２１０３５９ ＱＱ：４６４７６８０１７