SS12L thru SS110L SURFACE MOUNT REVERSE VOLTAGE - 20 to 100 Volts SCHOTTKY BARRIER RECTIFIERS FORWARD CURRENT - 1.0 Ampere FEATURES SOD-123FL ●Low profile package ●Ideal for automated placement .114(2.9) .098(2.5) ●Ultrafast reverse recovery time ●Low forward voltage drop .077(1.95) .061(1.55) ●Low power losses, high efficiency .039(1.0) .024(0.6) ●High surge capability ●High temperature soldering： 260℃/10 seconds at terminals ●Component in accordance to RoHS 2002/95/1 and WEEE 2002/96/EC .047(1.2) .031(0.8) MECHANICAL DATA ●Case: JEDEC SOD-123FL molded plastic body over passivated chip .043(1.1) .020(0.5) .154(3.9) .138(3.5) .010(0.25) .002(0.05) ●Terminals: Solder plated, solderable per J-STD-002B and JESD22-B102D ●Polarity: Laser band denotes cathode end ● Weight: 0.017gram .004(0.1)max Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25℃ ambient temperature unless otherwise specified. Single phase, half wave ,60Hz, resistive or inductive load. For capacitive load, derate current by 20% SYMBOL SS12L SS13L SS14L SS15L SS16L SS18L SS110L MARKING S12L S13L S14L S15L S16L S18L S110L Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 80 100 V Maximum RMS Voltage VRMS 14 21 28 35 42 56 70 V VDC 20 30 40 50 60 80 100 V CHARACTERISTICS Maximum DC Blocking Voltage Maximum Average Forward Rectified Current Peak Forward Surge Current @TL=100 ℃ 8.3ms Single Half Sine-Wave UNIT I(AV) 1.0 A IFSM 30 A Super Imposed On Rated Load (JEDEC Method) Maximum Forward Voltage at 1.0A DC @TA=25℃ at Rated DC Blocking Voltage @TA=100℃ Thermal resistance from junction to ambient (Note1) Operating Temperature Range Storage Temperature Range 0.55 VF Maximum DC Reverse Current 0.70 1.0 IR 10 0.85 V mA RθJA 88 ℃/W TJ -55 to + 150 ℃ TSTG -55 to + 150 ℃ Note1: Mounted on FR-4 P.C.B. With 0.9x1.5 mm copper pad areas (≈35 μm thick) REV. 1, 30-Dec-2011 ~ 200 ~ RATING AND CHARACTERTIC CURVES SS12L thru SS110L FIG. 2 – MAXIMUM NON-REPETITIVE SURGE CURRENT FIG. 1 - FORWARD CURRENT DERATING CURVE PEAK FORWARD SURGE CURRENT, (AMPERES） AVERAGE FORWARD CURRENT (AMPERES) 1.00 0.75 0.50 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD 0.25 0 25 50 75 100 125 150 40 30 20 10 PULSE WIDTH 8.3mS SINGLE HALF-SINE-WAVE (JEDEC METHOD) 0 1 175 2 5 LEAD TEMPERATURE ℃ 10 20 50 100 NUMBER OF CYCLES AT 60Hz FIG.3-TYPICAL FORWARD CHARACTERISTICS FIG.4-TYPICAL REVERSE CHARACTERISTICS 20 100 SS12L-SS14L SS15L-SS16L SS18L-SS110L 1.0 T J = 25°C PULSE WIDTH 300us 1% DUTY CYCLE 0.1 0 0.1 0.3 0.5 0.7 0.9 1.1 1.3 1.5 1.7 INSTANTANEOUS REVERSE CURRENT, (mA ) INSTANTANEOUS FORWARD CURRENT, (A) 10 T J=100℃ 10 1.0 0.1 T J=25℃ 0.01 0.001 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, (VOLTS) PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) REV. 1, 30-Dec-2011 ~ 201 ~