MILITARY DATA SHEET Original Creation Date: 10/26/95 Last Update Date: 11/10/95 Last Major Revision Date: 10/26/95 MNLM711AM-X REV 1A0 DUAL HIGH SPEED DIFFERENTIAL COMPARATOR General Description The LM711 is a dual differential voltage comparator featuring high accuracy, fast response times, large input voltage range, low power consumption and compatibility with practically all integrated logic forms. When used as a sense amplifier, the threshold voltage can be adjusted over a wide range, almost independent of the integrated circuit characteristics. Independent strobing of each comparator channel is provided, and pulse stretching on the output is easily accomplished. Other applications of the dual comparator include a window discriminator in pulse height detectors and a double ended limit detector for automatic Go-No-Go test equipment. Industry Part Number NS Part Numbers LM711AM LM711AMH/883 LM711AMJ/883 LM711AMW/883 Prime Die LM711AM Processing Subgrp Description MIL-STD-883, Method 5004 1 2 3 4 5 6 7 8A 8B 9 10 11 Quality Conformance Inspection MIL-STD-883, Method 5005 1 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 MILITARY DATA SHEET MNLM711AM-X REV 1A0 Features - Fast Response Time Low Offset Voltage Low Offset Current Independent Comparator Strobing 2 MILITARY DATA SHEET MNLM711AM-X REV 1A0 (Absolute Maximum Ratings) Storage Temperature Range -65 C to 175 C Operating Temperature Range -55 C to 125 C Lead Temperature (Soldering, 60 seconds) 300 C Internal Power Dissipation (Note 1) Can DIP Flatpack Positive Supply Voltage 350mW 400mW 330mW 14V Negative Supply Voltage -7V Peak Output Current 50mA Differential Input Voltage +5V Input Voltage +7V Strobe Voltage 0V to 6V Short Circuit Duration 10s Thermal Resistance ThetaJA H-Package (Still Air) (500LF/Min Air flow) J-Package (Still Air) (500LF/Min Air flow) W-Package (Still Air) (500LF/Min Air flow) 211 120 126 70 250 152 ThetaJC H-Package J-Package W-Package Note 1: C/W C/W C/W C/W C/W C/W 37 C/W 24 C/W 42 C/W Rating applies to ambient temperatures up to 125 C. Above 125 C ambient, derate linearly at 150 C/W for the Can and Flatpack and 120 C/W for the Dip. 3 MILITARY DATA SHEET MNLM711AM-X REV 1A0 Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc+ = 12V, Vcc- = -6V SYMBOL Vio PARAMETER Input Offset Voltage CONDITIONS NOTES Vcc- = -7V, Rs = 200 Ohms, Vcm = +5V Vcc- = -7V, Rs = 200 Ohms, Vcm = -5V Vcm = 0V, Rs = 200 Ohms Vcm = 0V, Rs = 50 Ohms Iio Iib Avs Voh Input Offset Current Input Bias Current Vcm = 0V MIN MAX UNIT SUBGROUPS 1 -5 5 mV 1 1 -6 6 mV 2, 3 1 -5 5 mV 1 1 -6 6 mV 2, 3 1 -3.5 3.5 mV 1 1 -4.5 4.5 mV 2, 3 1 -3.5 3.5 mV 1 1 -4.5 4.5 mV 2, 3 1 10 uA 1 1 20 uA 2, 3 75 uA 1 150 uA 2, 3 750 V 1 500 V 2, 3 Vout = Vol, Vcm = 0V Voltage Gain Positive Output Level PINNAME Vin = 10mV, Io = 0mA 2.5 5 V 1, 2, 3 Vin = 10mV, Io = 5mA 2.5 5 V 1, 2, 3 Vol Negative Output Level Vin = -10mV, Io = 0mA -1 0 V 1, 2, 3 OD Vol Over Driven Negative Output Level Vin = 5V, Io = 0mA -1 0 V 1, 2, 3 Isink Output Sink Current Vin = -10mV, Vo = 0V 0.5 mA 1 0.12 mA 2 0.25 mA 3 mA 1, 2, 3 mA 1, 2, 3 2.5 mA 1, 2, 3 0 V 1, 2, 3 dB 1, 2, 3 Icc+ Power Supply Current Vin = -5mV, Vout = Gnd 2 Icc- Power Supply Current Vin = -5mV, Vout = Gnd 2 Istrobe Strobe Current Vin = 10mV, Vst = 100mV Vo(ST) Strobed Output Vst = .3V -1 CMRR Common Mode Rejection Ratio Vcc- = -7V, Vcm = +5V, Rs = 200 Ohms 80 4 13.3 -6.1 MILITARY DATA SHEET MNLM711AM-X REV 1A0 Graphics and Diagrams GRAPHICS# DESCRIPTION 5970HRA2 10LD .230DIA PC TO-100 METAL CAN PKG H (B/I CKT) 6202HRA1 CERDIP (J), 14 LEAD (B/I CKT) 6209HRA1 CERPAC (W), 10 LEAD (B/I CKT) 8356HRA1 10LD .230DIA PC TO-100 METAL CAN H(B/I CKT) H10CRF 10LD .230DIA PC TO-100 METAL CAN H(P/P DWG) J14ARH CERDIP (J), 14 LEAD (P/P DWG) P000030A 10LD .230DIA PC TO-100 METAL CAN H(PIN OUT) P000110A CERDIP (J), 14 LEAD (PIN OUT) P000111A CERPAC (W), 10 LEAD (PIN OUT) W10ARG CERPAC (W), 10 LEAD (P/P DWG) See attached graphics following this page. 5