MBR20H200CT, MBRF20H200CT & MBRB20H200CT-1 Series Features TO-220AB (MBR20H200CT) 0.055 (1.40) 0.047 (1.20) 0.398 (10.10) 0.185 (4.70) 0.382 (8.70) 0.169 (4.30) 0.150 (3.80) 0.343 (8.70) Typ. 0.139 (3.54) 0.055 (1.40) Dia. 0.049 (1.25) 0.114 (2.90) 0.106 (2.70) 0.154 (3.90) 0.138 (3.50) 0.067 (1.70) Typ. PIN 2 1 0.638 (16.20) 0.598 (15.20) 0.634 (16.10) 0.618 (15.70) 0.331 (8.40) Typ. 3 0.370 (9.40) 0.354 (9.00) 1.161 (29.48) 1.105 (28.08) 0.118 (3.00) Typ. 0.102 (2.60) 0.087 (2.20) 0.035 (0.90) 0.028 (0.70) PIN 1 PIN 2 PIN 3 CASE 0.064 (1.62) 0.056 (1.42) 0.100 (2.54) Typ. 0.523 (13.28) 0.507 (12.88) 0.024 (0.60) 0.018 (0.45) 0.200 (5.08) Typ. • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Dual rectifier construction, positive center tap • Metal silicon junction, majority carrier conduction • Low leakage current, Low power loss, High efficiency • Guardring for overvoltage protection • For use in high frequency switching power supplies and converters with up to 48V output, free wheeling, and polarity protection applications • Rated for reverse surge and ESD Mechanical Data Case: JEDEC TO-220AB, ITO-220AB, TO-262AA molded plastic body Terminals: Plated leads, solderable per MIL-STD-750, Method 2026 High temperature soldering guaranteed: 250°C/10 seconds, 0.25" (6.35mm) from case (TO-220AB, ITO-220AB) at terminals (TO-236AB) Polarity: As marked Mounting Position: Any Mounting Torque: 10 in-lbs maximum Weight: 0.08 oz., 2.24 g Dimensions in inches and (millimeters) ITO-220AB (MBRF20H200CT) 0.408 (10.36) 1.29 (3.28) 0.392 (9.96) 1.21 (3.08) TO-262AA (MBRB20H200CT-1) 0.108 (2.74) Dia. 0.398 (10.10) 0.382 (9.70) 0.092 (2.34) 0.138 (3.50) 0.122 (3.10) 0.633 (16.07) 0.601 (15.67) 0.370 (9.40) 0.354 (9.00) 0.370 (9.39) 0.354 (8.99) 1 PIN 2 3 1 PIN 2 3 0.102 (2.60) 0.087 (2.20) 1.164 (29.55) 1.108 (28.15) 0.117 (2.96) PIN 1 PIN 2 PIN 3 CASE 0.531 (13.48) 0.507 (12.88) 0.523 (13.28) 0.507 (12.88) 0.035 (0.90) 0.028 (0.70) 0.039 (1.00) 0.024 (0.60) 0.100 (2.54) Typ. 0.058 (1.47) Typ. 0.200 (5.08) Typ. 0.024 (0.60) 0.018 (0.45) 0.425 (10.80) 0.393 (10.00) 0.488 (12.4) 0.472 (12.00) 0.101 (2.56) 0.396 (10.05) 0.372 (9.45) 0.055 (1.40) 0.049 (1.25) K 0.141 (3.58) 0.125 (3.18) 0.630 (16.00) 0.614 (15.60) 0.185 (4.70) 0.169 (4.30) 0.055 (1.40) 0.039 (1.00) 0.100 (2.54) Typ. 0.405 (10.28) 0.389 (9.88) 0.062 (1.57) 0.054 (1.37) 0.024 (0.60) 0.018 (0.45) 0.200 (5.08) Typ. PIN 1 PIN 2 PIN 3 CASE www.kersemi.com 1 MBR20H200CT, MBRF20H200CT & MBRB20H200CT-1 Series Maximum Ratings (TC = 25°C unless otherwise noted) Parameter Symbol MBR20H200CT MBRF20H200CT MBRB20H200CT-1 Unit Maximum repetitive peak reverse voltage VRRM 200 V Working peak reverse voltage VRWM 200 V Maximum DC blocking voltage VDC 200 V Maximum average forward rectified current Total device (Fig. 1) Per leg IF(AV) 20 10 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) per leg IFSM 290 A Peak repetitive reverse current per leg at tp = 2µs, 1KHZ IRRM 1.0 A Peak non-repetitive reverse surge energy (8/20µs waveform) ERSM 20 mJ Non-repetitive avalanche energy per leg at 25°C, EAS = 2.0A, L=10mH EAS 20 mJ Electrostatic discharge capacitor voltage Human body model: C = 100pF, R = 1.5KΩ VC 25 KV dv/dt 10,000 V/µs TJ, TSTG –65 to +175 °C Voltage rate of change (rated VR) Operating junction and storage temperature range (1) RMS Isolation voltage (MBRF type only) from terminals to heatsink with t = 1 second, RH ≤ 30% Electrical Characteristics (T C IF = IF = IF = IF = 10A, 10A, 20A, 20A, Symbol Typical Maximum Unit 25°C 125°C 25°C 125°C VF 0.81 0.65 0.87 0.74 0.88 0.75 0.97 0.85 V TJ = 25°C TJ = 125°C IR 5.0 1.0 µA mA CJ 250 pF Tj = Tj = Tj = Tj = Maximum reverse current per leg at working peak reverse voltage(4) Typical junction capacitance at 4.0V, 1MHZ Thermal Characteristics (T C V = 25°C unless otherwise noted) Parameter Maximum instantaneous forward voltage per leg at: 4500 3500 (2) 1500 (3) VISOL = 25°C unless otherwise noted) Parameter Typical thermal resistance per leg Symbol MBR MBRF MBRB Unit RΘJC 2.0 4.0 2.0 °C/W Notes: (1) Clip mounting (on case), where lead does not overlap heatsink with 0.110” offset (2) Clip mounting (on case), where leads does overlap heatsink (3) Screw mounting with 4-40 screw, where washer diameter is ≤ 4.9 mm (0.97”) (4) Pulse test: 300µs pulse width, 1% duty cycle Ordering Information Product Case Package Code Package Option MBR20H200CT TO-220AB 45 Anti-Static tube, 50/tube, 1K/carton MBRF20H200CT TO-200AB 45 Anti-Static tube, 50/tube, 1K/carton MBRB20H200CT-1 TO-262AA 45 Anti-Static tube, 50/tube, 1K/carton www.kersemi.com 2 MBR20H200CT, MBRF20H200CT & MBRB20H200CT-1 Series Fig. 1 – Forward Derating Curve Fig. 2 – Maximum Non-Repetitive Peak Forward Surge Current 350 325 MBR, MBRB Average Forward Current (A) Average Forward Current (A) 25 20 MBRF 15 10 5 0 50 75 100 125 150 150 125 100 75 50 25 0 1 10 100 Case Temperature (°C) Number of Cycles at 60 HZ Fig. 3 – Typical Instantaneous Forward Characteristics Fig. 4 – Typical Reverse Characteristics 100 10,000 TJ = 175°C 1,000 TJ = 175°C 10 TJ = 125°C TJ = 75°C 1 TJ = 25°C 0.1 0.1 100 TJ = 125°C 10 TJ = 75°C 1 TJ = 25°C 0.1 0.01 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 10 20 30 40 50 60 70 80 90 Instantaneous Forward Voltage (V) Percent of Rated Peak Reverse Voltage (%) Fig. 5 – Typical Junction Capacitance Fig. 6 – Typical Transient Thermal Impedance Per Leg Transient Thermal Impedance (°C/W) 1000 100 10 0.1 100 100 10000 Junction Capacitance (pF) 275 250 225 200 175 175 IR -- Instantaneous Reverse Current (µA) IF -- Instantaneous Forward Current (A) 25 300 1 10 Reverse Voltage (V) 100 10 MBRF 1 0.1 0.01 MBR, MBRB 0.1 1 10 100 t -- Pulse Duration (sec.) www.kersemi.com 3