SDB160G SCHOTTKY RECTIFIER DIODE Schottky Barrier Rectifier General Description The SDB160G surface mounted Schottky rectifier has been designed for applications requiring low forward drop and very small foot prints on PC boards. Typical applications are in disk drives, switching power supplies, converters, free-wheeling diodes, battery charging, and reverse battery protection. SOD-123 Features and Benefits Low forward drop voltage and low reverse leakage current Low power rectified “Green” device and RoHS compliant device Available in full lead (Pb)-free device Applications Free-wheeling applications Switching mode power supplies applications Ordering Information Part Number Marking Code Package Packaging SDB160G 16G□ SOD-123 Tape & Reel Marking Information 16G = Specific Device Code 16G□ □ = Year & Week Code Marking = Color band denote cathode Pinning Information Pin Description 1 Cathode 2 Anode Rev. date: 13-SEP-12 Simplified Outline KSD-D6B039-000 Graphic Symbol www.auk.co.kr 1 of 5 SDB160G Absolute Maximum Ratings (Tamb=25℃, Unless otherwise specified) Symbol Ratings Unit Maximum repetitive reverse voltage Maximum working peak reverse voltage Maximum DC blocking voltage VRRM VRWM VR 60 V Maximum average forward rectified current IF(AV) 1 A Peak forward surge current 8.3ms single half sine-wave superimposed on rated load per diode IFSM 12 A Maximum operating junction temperature TJ 150 Storage temperature range Tstg -55 ~ 150 Characteristic C Thermal Characteristics Characteristic Maximum thermal resistance Symbol Value Unit Rth(j-a) 3) 250 C/W Junction to ambient Electrical Characteristics (Tamb=25℃, Unless otherwise specified) Characteristic Symbol Test Condition Min. Typ. Max. Unit Reverse breakdown voltage V(BR)R IR=1.5mA 60 - - V Forward drop voltage VF 1) IF=1A - - 0.55 V Reverse leakage current IR 2) VR=60V - - 50 uA Total capacitance CT VR= 10V, f=1MHz - 45 - pF 1) Pulse test: tP≤380us, Duty cycle≤2% Pulse test: tP≤5ms, Duty cycle≤2% 3) Device mounted on glass epoxy PCB (recommanderable minimum solder land) 2) Rev. date: 13-SEP-12 KSD-D6B039-000 www.auk.co.kr 2 of 5 SDB160G Rating and Characteristic Curves Fig. 1) Typical Forward Characteristic Fig. 2) Typical Reverse Characteristic Fig. 3) Total Capacitance vs. Reverse Voltage Fig. 4) Power Dissipation vs. Ambient Temperature Rev. date: 13-SEP-12 KSD-D6B039-000 www.auk.co.kr 3 of 5 SDB160G Package Outline Dimensions (Unit : mm) ※ Recommend PCB solder land (Unit : mm) Rev. date: 13-SEP-12 KSD-D6B039-000 www.auk.co.kr 4 of 5 SDB160G The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. Rev. date: 13-SEP-12 KSD-D6B039-000 www.auk.co.kr 5 of 5