KR Electronics, Inc. KR Electronics 2534 Bandpass Filter www.krfilters.com General Description KR 2534 is a 150 MHz surface mount bandpass filter. Other cen- Features ter frequencies and bandwidths available. Please consult the fac- • Surface Mount Package tory. • Custom Elliptic Type Design • 50 Ω Source and Load Typical Performance Overall Response (10 dB/div) 29 Apr 2004 15:20:55 CH1 S21 LOG 5 dB/ REF 0 dB Cor START KR Electronics, Inc. 91 Avenel Street Avenel, NJ 07001 © 2004, KR Electronics, Inc. . 100 000 MHz STOP 500 . 000 000 MHz Web Email Phone Fax www.krfilters.com [email protected] (732) 636-1900 (732) 636-1982 Page 1 KR Electronics, Inc. www.krfilters.com KR 2534 Bandpass Specifications Parameter Specification Filter type Bandpass Center Frequency 150 MHz Insertion Loss < 2 dB (0.5 dB typical) Specified Passband 135 MHz to 165 MHz Passband Phase Linearity < 2° 25 MHz & below > 35 dB 85 MHz & below > 10 dB 285 MHz > 30 dB 435 MHz > 50 dB Phase matching available 50 Ω Source and Load Physical Dimensions Notes: 1. Surface mount package — Metal cover, open frame 2. Dimensions in inches 3. Use SN60 or SN63 solder during installation 4. If boards are cleaned after installation, units must be completely dried to remove any entrapped moisture that will effect electrical KR Electronics, Inc. 91 Avenel Street Avenel, NJ 07001 © 2004, KR Electronics, Inc. Web Email Phone Fax www.krfilters.com [email protected] (732) 636-1900 (732) 636-1982 Page 2