MP501M Thru MP5010M High Current Glass Passivated Molding Single-Phase Bridge Rectifier Reverse Voltage 100 to 1000V Forward Current 50.0 A FEATURES z Plastic Package has Underwriters Laboratory Flammability Classification 94V-0 z High current capacity with small package z Glass passivated chip junctions z Superior thermal conductivity z High IFSM 1. Maximum & Thermal Characteristics Ratings at 25℃ ambient temperature unless otherwise specified. Item Symbol MP501M MP502M MP504M MP506M MP508M MP5010M Unit Maximum repetitive voltage VRM 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 70 140 280 420 560 700 V VDC 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum DC reverse current TA=25℃ at rated DC blocking voltage IR 5 500 µA TA=125℃ Average recified forward current Tc=100℃ 60Hz sinewave,R-load with heatsink 50 Io A 10 Ta=38℃ Peak forward surge current 8.3 ms single half sine-wave superimposed IFSM 450 A I t 2 840 A2sec Vdia 2.5 KV VF 1.05 V Tj -55~150 ℃ Storage temperature Tstg -55~150 ℃ Mounting torque Tor Rating Torque : 1.2（Suggests 0.6~1.0） N.m on rated load Rating for Fusing (t<8.3ms) Dielectric strength Terminals to case, AC 1 minute Current 1mA Maximum instantaneous forward voltage at 25A Operating junction temperature 2 MP501M Thru MP5010M 2. Ratings and Characteristic Curves ( TA = 25°C unless otherwise noted ) Fig.2 Temperature (℃) Percent of Rated Peak Reverse Voltage％ Fig.4 Peak Surge Forward Capability Peak Surge Forward Current IFSM(A) Forward Voltage Forward Current (A) Fig.3 Typical Reverse Characteristics nstantaneous Reverse Current (µA) Average Rectified Forward Current Io(A) Fig. 1 Derating Curve Forward Voltage VF Number of Cycles 3 MP501M Thru MP5010M 3. Marking Identification Note： 生产日期码包含4位数字，例如 “1013”，前两个数字“10” 表示为2010年，另外二个数字 “13” 是指第13周，即表示该产品为2010年13周生产。 型号： MP 50 10 M Molding Epoxy bridge reverse voltage=1000V average rectified forward Current=50A mean：MP series bridge 4. Dimension 4